flyboy6 Posted September 16, 2016 Share Posted September 16, 2016 took out the hub bolts (Driver front) and as they are quite corroded, ordered new from dealer - the ones I took out are a smooth shank right to bolt head, and the OEM ones supplied (checked by VIN) have a serrated shoulder flange the last half inch or so before head. Anyone seen this? Don't want to try driving a serrated shoulder into a steering knuckle back that is not fitted for it. (sorry, no pix) Link to comment Share on other sites More sharing options...
86BRATMAN Posted September 16, 2016 Share Posted September 16, 2016 Sounds like they sold you replacement lug studs instead of what you needed. 1 Link to comment Share on other sites More sharing options...
Fairtax4me Posted September 16, 2016 Share Posted September 16, 2016 Lug studs have a knurled shank at the base. The knurling is deformed when the stud is pressed in and it holds the stud in place. Link to comment Share on other sites More sharing options...
flyboy6 Posted September 22, 2016 Author Share Posted September 22, 2016 aha - that sounds like it. thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now