turbosubarubrat Posted October 4, 2016 Share Posted October 4, 2016 Only run 1 rear axle on the road with a welded diff. If you don't eventually you will break a stub. Link to comment Share on other sites More sharing options...
ClassySoob Posted October 4, 2016 Author Share Posted October 4, 2016 Yeah she is a daily driver, so i would probably have to do that. Or i might just convert to a bigger diff compatible with a locker. Link to comment Share on other sites More sharing options...
Uberoo Posted October 4, 2016 Share Posted October 4, 2016 on 13" street tires the tires will probably break traction before the stud axle breaks what turbosubarubrat said is technically correct but it only really applies to lifted offroad vehicle with big heavy tires,on factory tires the tires really don't have that much grip to do anything,especially if you run the rear tires slightly over inflated. 1 Link to comment Share on other sites More sharing options...
ClassySoob Posted October 5, 2016 Author Share Posted October 5, 2016 Ok yeah I'm still running stock for now, but I use her for offroading ever now and then. She'll go places like she is, but when I get stuck (rarely) both wheels could be useful haha. Link to comment Share on other sites More sharing options...
Bantum Posted October 6, 2016 Share Posted October 6, 2016 If you can wait a bit longer, these will becoming out soon : Check 'em out & request one here : http://www.caplocker.com/ Cheers, Bantum ... Link to comment Share on other sites More sharing options...
turbosubarubrat Posted October 6, 2016 Share Posted October 6, 2016 If you can wait a bit longer, these will becoming out soon : Check 'em out & request one here : http://www.caplocker.com/ Cheers, Bantum ... Any idea on cost? Patrick (ADF) made a locker proto type out of plastic and has everything ready for a company to make it. The only thing he was running into was the cost and lack of people ready to buy it since it would take like 100 people to make it cost effective. Link to comment Share on other sites More sharing options...
Bantum Posted October 6, 2016 Share Posted October 6, 2016 (edited) Going by the other lockers on their site, somewhere between $800 to $1000 AU.They never are going to be cheap, but worth the money ... Ciao, Bantum ... Edited October 6, 2016 by Bantum Link to comment Share on other sites More sharing options...
ClassySoob Posted October 6, 2016 Author Share Posted October 6, 2016 That would be worth while. Any idea on when it'll come out? Link to comment Share on other sites More sharing options...
Quidam Posted October 8, 2016 Share Posted October 8, 2016 (edited) I read this whole thread and I'm thinking Detroit Locker lol. Inside joke. Hal Quick Change... A thousand bucks for that? get real Edited October 8, 2016 by Quidam Link to comment Share on other sites More sharing options...
Bantum Posted October 12, 2016 Share Posted October 12, 2016 Far as I know they are in 'testing' mode, so will most likely be next year sometime before we know any more. P.S. - That's in AU so will be like $600 to $800 US ... Cheers, Bantum ... 1 Link to comment Share on other sites More sharing options...
ClassySoob Posted October 17, 2016 Author Share Posted October 17, 2016 I would definitely give one of those a try Link to comment Share on other sites More sharing options...
Quidam Posted October 18, 2016 Share Posted October 18, 2016 I'm about ready to install a 31 spline 9 inch Ford with locker in my Sedan. It's out of a 79 Ranger F 150. The axels can be cut and resplined. Local Dirt Track guys can supply the rest. Doug Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 18, 2016 Share Posted October 18, 2016 I'm about ready to install a 31 spline 9 inch Ford with locker in my Sedan. It's out of a 79 Ranger F 150. The axels can be cut and resplined. Local Dirt Track guys can supply the rest. Doug what gear ratio will you run and wheel bolt pattern? Link to comment Share on other sites More sharing options...
Quidam Posted October 18, 2016 Share Posted October 18, 2016 (edited) <p><p>4:44 and whatever the Ford has for a bolt pattern. Possibly 5 on 5?</p><br /> </p> Edited October 18, 2016 by Quidam Link to comment Share on other sites More sharing options...
Quidam Posted October 18, 2016 Share Posted October 18, 2016 (edited) <p><img alt="RCU-00565-2.jpg" height="240" src="http://cdn3.volusion.com/5cfxm.hxrs6/v/vspfiles/photos/RCU-00565-2.jpg" width="320" /></p> <p> </p> <p>$150.00 from Roush Motorsports NASCAR used.</p> Edited October 18, 2016 by Quidam Link to comment Share on other sites More sharing options...
scobbyru Posted March 5, 2017 Share Posted March 5, 2017 I called ox lockers and talked to them a bit. Since they don't make one the set up cost would be close to 10-12k just to try to make the first one :-/ Link to comment Share on other sites More sharing options...
ferp420 Posted March 5, 2017 Share Posted March 5, 2017 We need a locker for the front the rear already has good options going for it lsd or welded both cheap comparativly and efective the solid axle opens up a whole new world but the front diff we have nothing i guess it to could be welded but thats not realy a option some kind of lsd or locker would be nice up front theres always the transfer case option but thats alot of fab work and probably not gona be streetable after that depending on how good a fabricator you are for $600-$800 i could buy and build a whole new rig weld it up lift it and put tires and rims on it for less im not spending that kind of money on novaltie items for a loyale especialy since the locker would be harder on parts than a lsd so slightly less reliable and considering you kinda have to be stuck or close to for the locker to engage and lock up unless its a air/electric locker your gona lose performance compared to a spool or welded diff so no real benifit to using a way over priced locker on a solid axle rig you cant just pull one axle shaft out for street use thats why there used alot on wheelers that are also used on the street Link to comment Share on other sites More sharing options...
Bantum Posted April 29, 2017 Share Posted April 29, 2017 The 'R160 Diff Locker Project' has been started over on FB, you're welcome to check it out & fill in the survey.We'll be looking at making a prototype eventually that can be field tested, then it should be available for production.More info here : https://www.facebook.com/R160.Diff.Locker.Project/ Cheers, Bantum ... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now