alexbuoy Posted October 10, 2016 Share Posted October 10, 2016 Hello everyone I have a 1991 loyale that had to get dragged out over rocks. My oil pan took some hits but I was wondering if it is still reusable. There are no cuts or holes in the pan. Thanks everyone! image share Link to comment Share on other sites More sharing options...
Len Dawg Posted October 10, 2016 Share Posted October 10, 2016 (edited) I'm sure it is so long as the stem of the oil sump is not hitting the bottom... I scraped mine a couple times.. that's what happens when i decide to go offroading the day after repairs... skid plate 4 bolts super easy its on there now that's for sure.. Looks like alot got smashed off the bottom lol !! Are ya atleast alright? Does the clock work now? Edited October 10, 2016 by Len Dawg 1 Link to comment Share on other sites More sharing options...
987687 Posted October 10, 2016 Share Posted October 10, 2016 I personally wouldn't use it, especially since it looks like an offroader. The integrity of the pan has been severely compromised. Next time you take a hit, it'll probably rip the pan open instead of denting. Also it looks to be worn thin in some places, wouldn't not take much of a rock to cut through. A good skid plate should also be in your future to avoid that happening again. Link to comment Share on other sites More sharing options...
Norcalbratcap Posted October 11, 2016 Share Posted October 11, 2016 Yeah toss it and find a new one, thats what killed my 84 gl, dented the oil pan and didn't really notice, a week later the engine seized going down the highway, pulled the pan off the pickup tube was right up against the pan, not getting any oil, better to be safe. Link to comment Share on other sites More sharing options...
alexbuoy Posted October 11, 2016 Author Share Posted October 11, 2016 Thanks for the replies everyone. Looks like I'll be replacing the pan with my parts ea82. Link to comment Share on other sites More sharing options...
alexbuoy Posted October 11, 2016 Author Share Posted October 11, 2016 I'm sure it is so long as the stem of the oil sump is not hitting the bottom... I scraped mine a couple times.. that's what happens when i decide to go offroading the day after repairs... skid plate 4 bolts super easy its on there now that's for sure.. Looks like alot got smashed off the bottom lol !! Are ya atleast alright? Does the clock work now? I'm totally wishing I had a skidplate on my car. Good thing my other loyale has one that I can steal. The knuckle snapped and I had to get dragged back 2 miles scraping everything off. It was pretty rad haha. A couple more of these beatings and then hopefully the clock will work 1 Link to comment Share on other sites More sharing options...
Norcalbratcap Posted October 11, 2016 Share Posted October 11, 2016 Ya i was stoked that my brat came with it's skidplate but it wasn't installed so that was the very first thing i did after i put the rebuilt motor back in the seats are the next thing i put back. Link to comment Share on other sites More sharing options...
idosubaru Posted October 11, 2016 Share Posted October 11, 2016 you've already pulled the pan? i'd definitely replace it, is there any reason not to replace it? doesn't seem like it would be hard to get another EA82 oil pan for cheap. Link to comment Share on other sites More sharing options...
Uberoo Posted October 11, 2016 Share Posted October 11, 2016 find a skidplate or make one-its easy to to tag a rock without even noticing it. As far as the knuckle breaking,become one with your inner redneck,ducttape,ratchet straps,pieces of wood,etc have been used to limp vehicles off the trail before. 1 Link to comment Share on other sites More sharing options...
Norcalbratcap Posted October 11, 2016 Share Posted October 11, 2016 ^ yeah, like this fella Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now