john54 Posted October 21, 2016 Share Posted October 21, 2016 Hello there, This is my first post to the forum and i'm hoping someone can help me. While installing a reversing camera and parking sensors in my Subaru Impreza 2012, I had to remove the small front right (drivers side) kick panel. While running the reversing camera wire, I found two unconnected wires, one male and one female connector, hanging close together. mauve?/white (male) and black/yellow (female) (see attached photo) Given their proximity and the fact that they would easily connect together, i'm wondering if they should be connected and have somehow come apart. I'm hoping some kind person with the necessary knowledge or a similar age vehicle can take the time to check and advise me if I should connect them or not. Thanking You John Wex Link to comment Share on other sites More sharing options...
Fairtax4me Posted October 21, 2016 Share Posted October 21, 2016 They're either test/diagnostic connectors or wire connectors for some option your car doesn't have. Leave them unplugged. Link to comment Share on other sites More sharing options...
DaveT Posted October 21, 2016 Share Posted October 21, 2016 There should be an online FSM for that, you can find every connector in those. Link to comment Share on other sites More sharing options...
john54 Posted October 22, 2016 Author Share Posted October 22, 2016 Thanks for the replies guys. Forgive my ignorance DaveT but what is a FSM... Fact? Sheet? ??? and how would I find it? Link to comment Share on other sites More sharing options...
DaveT Posted October 22, 2016 Share Posted October 22, 2016 Sorry, Factory Service Manual. Link to comment Share on other sites More sharing options...
john54 Posted October 23, 2016 Author Share Posted October 23, 2016 Thanks Dave. Will have a look online. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now