Downwash77 Posted October 21, 2016 Share Posted October 21, 2016 Is the front crank pulley bolt left or right hand, can't get it off with impact, don't know if I'm making it tighter. Thanks Link to comment Share on other sites More sharing options...
DaveT Posted October 22, 2016 Share Posted October 22, 2016 It is a standard thread. Right = tight. Link to comment Share on other sites More sharing options...
Downwash77 Posted October 22, 2016 Author Share Posted October 22, 2016 Thanks! Link to comment Share on other sites More sharing options...
dfoyl Posted October 22, 2016 Share Posted October 22, 2016 Stuff thin rope down inside one of the spark plug holes into the top of the cylinder and the piston will get "stuck" as it travels up. Then you can use an impact wrench or breaker bar to remove the crank pulley. Make sure to disconnect battery first so car doesn't try to start! Link to comment Share on other sites More sharing options...
Downwash77 Posted October 22, 2016 Author Share Posted October 22, 2016 Thanks the rope trick savedyou rump roast! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now