rdweninger Posted November 9, 2016 Share Posted November 9, 2016 Hello all. I always read about the missing set screw (my ea82's are all 1985)... now it seems as though I bought one. It's an '89 DL wagon, AT, 2wd, EFI. I need to buy a set screw, anyone know what size? And curious what years ea82 had the set screw? Thanks for the help, I appreciate it. RW Link to comment Share on other sites More sharing options...
DaveT Posted November 10, 2016 Share Posted November 10, 2016 I'll try to remeber to look at one tonight. Link to comment Share on other sites More sharing options...
superooo Posted November 11, 2016 Share Posted November 11, 2016 Doing my fi swap had to return and 88 and 89 rotor because they were slip fit, got one for a 92 loyale and it was the proper one, so between 89 and 92 lol Link to comment Share on other sites More sharing options...
idosubaru Posted November 12, 2016 Share Posted November 12, 2016 It's an 8mm head right? I think those are M5x0.80 threads. 10mm head subaru bolts are M6x1.00. Link to comment Share on other sites More sharing options...
DaveT Posted November 12, 2016 Share Posted November 12, 2016 If it is the screw that holds the rotor on the distributor, it is a lot smaller than that. It's a Phillips head, not a hex. It's something like 3mm diameter, but I'd have to check one. Link to comment Share on other sites More sharing options...
superooo Posted November 12, 2016 Share Posted November 12, 2016 Ya, im no good with thread sizes, just robbed one off another dist Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now