brsboarder Posted November 27, 2016 Share Posted November 27, 2016 So, I brought my 05 legacy in for the airbag replacement. 1 day after bringing in it, the CEL turned solid and the cruise control light flashes. The hazard button also doesn't light up and pushing it doesn't activate my hazards. Finally, I had a hardwired iphone connect put in on the secondary market when I first got my car that charged my phone, and played through the radio. Any idea what could cause all 3 problems? I know its going to be a fight with my dealership, they are horrible. Link to comment Share on other sites More sharing options...
987687 Posted November 27, 2016 Share Posted November 27, 2016 Figure out what the CEL is on for (take it to an autozone or something, they'll read the code for free). Also check your fuses. Pending any burned out fuses and the code causing the problem, it's anyone's guess. Link to comment Share on other sites More sharing options...
golucky66 Posted November 27, 2016 Share Posted November 27, 2016 Imo, sounds like when they replaced the air bag they left something unplugged or damaged something. Link to comment Share on other sites More sharing options...
Silent Bob Posted November 30, 2016 Share Posted November 30, 2016 CEL- probably coincidental. hazards- forgot to plug the switch back in. Iphone thingy- most likely interrupts the antenna, so again likely forgot to plug it in. Link to comment Share on other sites More sharing options...
Rooster2 Posted November 30, 2016 Share Posted November 30, 2016 After reading your post, and following responses, I agree that your problem is most likely caused by the dealer techs on replacing the air bag. As stated they either forgot to plug in electrical connectors they had disconnected when working on the air bags, or they damaged wiring. Either way, you need to go back to the dealer, and tell them your problem, and have them fix it. You have said they are horrible to deal with, if so, and they try to give you a hard time, then tell them you are going to go over their head, and talk to the Subaru district manager to get your problem fixed. Maybe it is because I am getting old and cranky, but I have learned over a life time not to take it from anyone giving me a hard time. When you know that you did not have these car problems before taking to the dealer, and now you have the problems upon them working on the car, then it is the dealer that has caused the problem. Then be tough, and let them know that, and nicely demand that they fix the problem. Don't take NO for an answer. If you would like some strategy on how to approach this dealer in expanded detail, I would be happy to give you advise. Just send me a PM. Rooster2 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now