XHighOctanex Posted February 9, 2017 Share Posted February 9, 2017 So I installed an adf 2 inch lift last night and neither front block was marked l or r which way we're they supposed to go in, they're done now but I've got some nasty positive camber and I know it takes time to settle but I want to make sure they're in right does it slope in our outwards of the car towards motor from the strut or towards the wheel. I could find pictures. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 9, 2017 Share Posted February 9, 2017 The strut top and lift block needs to go inward towards the engine Scott with SJR lift Link to comment Share on other sites More sharing options...
idosubaru Posted February 9, 2017 Share Posted February 9, 2017 like he said - bring that strut top further in. current orientation is incorrect so mark them and you know there's only two more possibilities. Install both fronts in the other two orientations and one will be right - mark that and copy. Link to comment Share on other sites More sharing options...
XHighOctanex Posted February 10, 2017 Author Share Posted February 10, 2017 I had them swapped so I had to pull them back out and switch sides all fixed now, pain in the rump roast to do that lower balljoint though Link to comment Share on other sites More sharing options...
XHighOctanex Posted February 10, 2017 Author Share Posted February 10, 2017 The strut top and lift block needs to go inward towards the engine Scott with SJR lift Do you make just a subframe lowering kit for a 2inch kit but by itself? Say I wanted to add the drop down the road Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 11, 2017 Share Posted February 11, 2017 (edited) Do you make just a subframe lowering kit for a 2inch kit but by itself? Say I wanted to add the drop down the roadyep see the 2 bars in lower part of picture, plus 4 long bolts shipped $110 http://www.sjrlift.com/images/stories/virtuemart/product/sjr ea82 2 alloy.jpg Edited February 11, 2017 by Scott in Bellingham Link to comment Share on other sites More sharing options...
djellum Posted February 12, 2017 Share Posted February 12, 2017 also loosen the radius rod to help with flex to do the ball joint. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now