Hamsamsquanch Posted February 13, 2017 Share Posted February 13, 2017 Hey guys, I scored some single port EJ22 heads for cheap yesterday and got a loaded intake and the Y-pipe with it. I figured I might as well go for a 2.5 block since I'm shopping anyways. Is there a certain one I should be using to match my heads? Heres a link to an album with a picture of the heads in it: https://imgur.com/gallery/3Q4Eo Link to comment Share on other sites More sharing options...
dfoyl Posted February 13, 2017 Share Posted February 13, 2017 As long as the heads and intake are a set you can put on any EJ25 short block. Link to comment Share on other sites More sharing options...
turbosubarubrat Posted February 13, 2017 Share Posted February 13, 2017 Don't use a 96 2.5 block or you will have to swap out the flat top pistons. They cause to high of compression and will melt pistons. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now