Jman1991 Posted February 18, 2017 Share Posted February 18, 2017 I recently tested my cylinders in my Loyale with a SPFI EA82 the PSI I recorded was Cylinder 1 - 150 PSI Cylinder 2 - 140 PSI Cylinder 3 - 140 PSI Cylinder 4 - 135 PSI I,m looking for the proper PSI for this engine so I can compare it with recordings that I took. If anyone knows the specifications I would greatly appreciate it. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted February 18, 2017 Share Posted February 18, 2017 That's a 9.5:1 engine. Ideal numbers at sea level would be 190 psi. But the number isn't important as much as the difference between highest and lowest. Ideally you want less than 5% difference between high and low. It's most likely low due to valve sealing. Probably needs a valve lap/grind. G Link to comment Share on other sites More sharing options...
Jman1991 Posted February 19, 2017 Author Share Posted February 19, 2017 thanks for the info! ''general disorder'' Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now