Jman1991 Posted February 20, 2017 Share Posted February 20, 2017 I think my manual 5 speed transmission is going out in my 1993 loyale. It slips out of first gear and is reluctant to go into reverse. I can't find a rebuild kit anywhere online, dose anyone know where to get one? Link to comment Share on other sites More sharing options...
DaveT Posted February 20, 2017 Share Posted February 20, 2017 Long shot, try one of the dealers. They can check stock across the entire country. Link to comment Share on other sites More sharing options...
86BRATMAN Posted February 20, 2017 Share Posted February 20, 2017 Most all of the bearings and synchros for that transmission cross over to the early (90-94) legacy non turbo manual transmission. 1 Link to comment Share on other sites More sharing options...
Naked Buell Posted February 20, 2017 Share Posted February 20, 2017 Sure you can rebuild it. Don't let anyone say otherwise. It just takes some homework. Link to comment Share on other sites More sharing options...
Jman1991 Posted February 20, 2017 Author Share Posted February 20, 2017 well looks like I have some research to do. thanks guys! Link to comment Share on other sites More sharing options...
skishop69 Posted February 20, 2017 Share Posted February 20, 2017 There is no kit, but it can be rebuilt. The bearings you can get through almost any bearing supplier, but you'll have to get the numbers off the bearings inside. The Subie numbers won't cross. I researched internal hard parts some time ago, and the cost of 2 or 3 internal parts is more than a used tranny. You can price it out, but I'd just get a used tranny. 5spd failures are pretty uncommon. Link to comment Share on other sites More sharing options...
TomRhere Posted February 20, 2017 Share Posted February 20, 2017 May be weak trans/engine mounts and worn shifter bushings not letting the trans go fully into selected gear(s). Link to comment Share on other sites More sharing options...
Jman1991 Posted February 21, 2017 Author Share Posted February 21, 2017 hmmm, ill check the trans/engine mounts, im not sure what the shifter bushings are though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now