Hoshwa Posted February 26, 2017 Share Posted February 26, 2017 I have a 2006 Forester, and after 5 years each remote has broken in exactly the same way. The lock switch breaks off of the microprocessor board and seems impossible to reattach. I have a OEM remote I bought a couple of years ago and wish to program it. I have read the posts re opening and closing the door, turning ignition from lock to unlock 10 times, opening and closing the door and when there is an audible signal, reprogramming the remote code by locking and unlocking the car door. I have done this many times in the past couple of days and cannot get it into programming mode to save my life. What am I missing. If anyone can be of help, I would greatly appreciate it. Link to comment Share on other sites More sharing options...
forester2002s Posted February 26, 2017 Share Posted February 26, 2017 This site might help: http://www.cars101.com/subaru/keyless.html#05 legacy program remotes Link to comment Share on other sites More sharing options...
Hoshwa Posted February 26, 2017 Author Share Posted February 26, 2017 That is one of the approaches I used. No luck after several approaches. Anyone here have a 2006 Forester that had the same problem? Please help if you can. I am at a loss! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now