kmpdx Posted March 22, 2017 Share Posted March 22, 2017 (edited) Hey guys, In the engine compartment where the clutch cable comes in it appears that there is a hole where a spring would fit in to help stabilize the clutch cable. The cable makes a lot of noise which stops when i put my finger on the assembly or push the clutch in. I have been waiting months for a donor to come in to Pick and Pull South to pull a spring with no luck. Now that I have fixed some more major problems I am ready to deal with that missing spring. What size (length) spring will work in there? Thanks! kmpdx Edited March 22, 2017 by kmpdx Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 22, 2017 Share Posted March 22, 2017 Order it from the dealer. It's probably less than $5. GD Link to comment Share on other sites More sharing options...
kmpdx Posted March 22, 2017 Author Share Posted March 22, 2017 (edited) So I guess it is called a clutch fork spring. Since the dealer was not open I had an at first frustrating phone call with my local Oreily. Fortunately, the other guy there had a brain and suggested that a spring of the right length would work and that they may have one or that there were places in town where I could have one fabricated. So I went out to the garage, grabbed a piece of wire recycled from a pinata no less, and made my own spring by tightly coiling the wire around a screwdriver. The coils are like 2.5 inches and then I put one end in. pulled tension, and cut the right length. Totally works and no more squeaking noise! Have to give credit to the picture in this post. http://www.ultimatesubaru.org/forum/topic/128564-help-remove-hill-holder/ I will replace this with a proper spring pulled or from dealer soon Edited March 22, 2017 by kmpdx Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now