Twagoss Posted April 17, 2017 Share Posted April 17, 2017 I have a 12/95 legacy wagon 2.2 awe man. I threw a CEL I tried to retrieve the codes via the test sensors under the stearing I followed the directions but no code will flash..the CEL. Just continues to flash with no code at all.... I've tried everything any advice? Link to comment Share on other sites More sharing options...
dp213 Posted April 18, 2017 Share Posted April 18, 2017 Go to an auto parts store and have them scan it Link to comment Share on other sites More sharing options...
keith3267 Posted April 20, 2017 Share Posted April 20, 2017 You might have OBDI instead of OBDII. Yours is a 96 model but I'm not sure the early 96's had OBDII Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 21, 2017 Share Posted April 21, 2017 95's have OBDII. GD Link to comment Share on other sites More sharing options...
idosubaru Posted April 21, 2017 Share Posted April 21, 2017 Has this car ran flawlessly since you bought it new in 1995 or did you apply for a salvage title after finding it abandoned in the forest? Are the green connectors under the dash connected? If so - disconnect them. They're test mode connectors only, not meant to stay plugged in. The spark plugs and wires are now 22 years old - that's WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAYYYYYYYYYYYYYYYYYYYYYYYYY overdue for changing and these engines aren't forgiving - make sure they're NGK plugs and wires. Have you tried to read the codes with an OBDII scanner? (Advance, napa, autozone, and others all read codes for free) Does this car run and drive? If it has multiple codes - clear them and see which come back first. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now