TYP Posted May 1, 2017 Share Posted May 1, 2017 Hello, I'm new on here and am looking for some advice. I have an old 92 subaru Loyale. Yesterday I lost all drive in the front right wheel/hub. Still drives in 4wd though. The cv and hub still spin but the wheel won't engage. Grease has been leaking out and it was smoking after I revved it up a bit since it was spinning. Is there a pin broken or something sheered off so that the wheel isn't being engaged or could something in there be stripped??. Thanks for any advice/help. I am getting ready to take the wheel and hub off to have a look. Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted May 1, 2017 Share Posted May 1, 2017 The hubs splines stripped out you will need to find another one. You should also replace the axle too since the splines will most likely be damaged. Quote Link to comment Share on other sites More sharing options...
TYP Posted May 1, 2017 Author Share Posted May 1, 2017 Ya that's what I figured. Thanks Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted May 2, 2017 Share Posted May 2, 2017 I have one Id sell PM me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.