beachbum Posted June 17, 2004 Share Posted June 17, 2004 hey guys will an 80 brat rear window fit an 85 brat? or is that considered generation 1? thnx bb Link to comment Share on other sites More sharing options...
carfreak85 Posted June 17, 2004 Share Posted June 17, 2004 I don't think the rear windows will interchange. Gen 1 is 1978 to 1981 and Gen 2 is 1982 to 1987/8 Link to comment Share on other sites More sharing options...
beachbum Posted June 17, 2004 Author Share Posted June 17, 2004 thnx cf, i was pretty sure it wouldnt but its so cheap on ebay i was hoping:brow: Link to comment Share on other sites More sharing options...
ShawnW Posted June 17, 2004 Share Posted June 17, 2004 Do u just have a solid one right now or do you need glass pieces cuz you broke yours? Ive got the individual pieces just no frame available. The full slider is spoken for on my other post. Link to comment Share on other sites More sharing options...
carfreak85 Posted June 17, 2004 Share Posted June 17, 2004 I have the frame and the passenger's side glass if you're interested. Link to comment Share on other sites More sharing options...
beachbum Posted June 17, 2004 Author Share Posted June 17, 2004 hey guys i have the slider window and the glass pieces r messed up,so i just wanted to replace the 2 glass pieces.thnx and let me know Link to comment Share on other sites More sharing options...
ShawnW Posted June 17, 2004 Share Posted June 17, 2004 I have a tinted pair of glass panels that are that purple tint DIY stuff or I have a clear one for the pass side. Im not sure if you could remove the tinting or not. This website says you can: http://www.tintdude.com/remove.html Link to comment Share on other sites More sharing options...
PHATBRAT Posted June 17, 2004 Share Posted June 17, 2004 I've got a whole rear slider for sale cheap if you want it. It's ready to go. PM me if interested. Boz Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted June 17, 2004 Share Posted June 17, 2004 As far as the tinting goes, since it's already out. Go down to your parts store and get a can of aircraft remover, spray down the windows, and let them sit for about 20-30 minutes, then wash with water, the tint will come off when you rinse it. Just make sure that you don't get that stuff on your skin, pick up some hazmat gloves if you can, it'll eat right through latex gloves! Link to comment Share on other sites More sharing options...
beachbum Posted June 19, 2004 Author Share Posted June 19, 2004 hey guys once again thnx for all ur help and suggestions,but i found a slider window,frame and gasket today at the j/y for 10 bucks,couldnt beat that deal. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now