TheGageinator Posted May 22, 2017 Share Posted May 22, 2017 (edited) I made some 2inch spacers for my loyale, but I cannot get them installed. How are you guys getting them in place between the strut mount and strut tower? Spacers are 2x2x1 in front. I can't push the strt down far enough to get them in place.I had a very large 87 DL 10 years ago, but it was already lifted when I got it. I'm starting over with this Loyale, and I'd like to not by the crazy expensive SJR kit if possible. I can fab whatever is needed Edited May 22, 2017 by TheGageinator Link to comment Share on other sites More sharing options...
ferp420 Posted May 22, 2017 Share Posted May 22, 2017 I Use my foot to push tbe tire down and drop the blocks in from the top takes about 5 min per side Link to comment Share on other sites More sharing options...
TheGageinator Posted May 23, 2017 Author Share Posted May 23, 2017 I finally got them in. I wasnt so lucky. I made a video. I'll post it Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now