Water Bypass "Rubber" hose Install

[06SubLegTx]

Hey, is there any secret to installing the small rubber hose from the waterpump to the metal cooling line?  

 

It's very hard to get the rubber hose to slide on the metal line because the metal tube want to flex on the tabs that hold it to the block. 

 

Is there a Secret Lube to help it slide on?  Trick?

 

 

Thanks

 

[Fairtax4me]

https://www.walmart.com/ip/CNC-Heavy-Duty-Silicone-Lubricant/16817419?wmlspartner=wlpa&selectedSellerId=0&wl13=4638&adid=22222222228000000000&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-310687322322:pla-51320962143&wl5=1027070&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=16817419&wl13=4638&veh=sem

 

That's what I use. Spray it on both and pop them together quick because it dries in about 20 seconds.

[GeneralDisorder]

WD-40.

 

GD

[06SubLegTx]

https://www.walmart.com/ip/CNC-Heavy-Duty-Silicone-Lubricant/16817419?wmlspartner=wlpa&selectedSellerId=0&wl13=4638&adid=22222222228000000000&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-310687322322:pla-51320962143&wl5=1027070&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=16817419&wl13=4638&veh=sem

 

That's what I use. Spray it on both and pop them together quick because it dries in about 20 seconds.

Edited June 4, 2017 by 06SubLegTx

[06SubLegTx]

https://www.walmart.com/ip/CNC-Heavy-Duty-Silicone-Lubricant/16817419?wmlspartner=wlpa&selectedSellerId=0&wl13=4638&adid=22222222228000000000&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-310687322322:pla-51320962143&wl5=1027070&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=16817419&wl13=4638&veh=sem

 

That's what I use. Spray it on both and pop them together quick because it dries in about 20 seconds.

Thanks it worked great