gravelRX Posted June 18, 2004 Share Posted June 18, 2004 Wasn't going for pretty, just functional. XT6 bar is installed, just have to reinforce the mounting points this weekend. Have swapped out the rear shocks and discs from a turbo wagon, going for the front struts Sat. This is my 1986 wagon, the low dollar mobile, so I wasn't interested in finding the lower control arms with the mounts to swap in. More pictures to come if anyone is interested. Jay Carfreak, this will work for the EA81 cars too. Link to comment Share on other sites More sharing options...
carfreak85 Posted June 18, 2004 Share Posted June 18, 2004 Requesting pics of the mounts installed on the car! Link to comment Share on other sites More sharing options...
gravelRX Posted June 18, 2004 Author Share Posted June 18, 2004 Should have it completely done on Sun. I'll snap some pictures for you. Jay Link to comment Share on other sites More sharing options...
MorganM Posted June 18, 2004 Share Posted June 18, 2004 awsome, that's custom work man more pics pls !_! Link to comment Share on other sites More sharing options...
SubaRube Posted June 18, 2004 Share Posted June 18, 2004 I'd like to see more pics too. Cheap and easy, my favorite combo. Link to comment Share on other sites More sharing options...
gravelRX Posted June 20, 2004 Author Share Posted June 20, 2004 Ran into a snag when putting this bar on the back of the car. My Cambell Hausfeld wire feed welder decided to quit working properly. The wire is ALWAYS hot now. So you can't position it where you want it and start welding. I went ahead and used it, don't like the welds very much, but penetration was good and it got the job done. Went and bought a Lincoln Electronics PRO MiG 135T mig welder today, going to go get a tank of argon/CO2 for it tomorrow. Got a self darkening mask too. The welder and the mask are a big difference, BIG. After the fact, but good none the less. This should definately help the fabrication projects. Jay Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now