Ezzachef Posted June 22, 2017 Share Posted June 22, 2017 I have a 2001 Forester L. It is a manual 5 speed. The front U joint failed and the drive shaft dropped. As I was pulling the car home, a little over 1/2 a mile, the stick shift popped loose. When I took the cover off I saw the ball joint had popped out of the socket. How would I get it back in? It will not fall into place by hand. Thank you. Link to comment Share on other sites More sharing options...
Mike104 Posted June 23, 2017 Share Posted June 23, 2017 Push HARD. Apply some grease to the ball end and push down hard Link to comment Share on other sites More sharing options...
Ezzachef Posted August 11, 2017 Author Share Posted August 11, 2017 Gonna try again tomorrow. I've been extremely busy with work. Link to comment Share on other sites More sharing options...
Fairtax4me Posted August 12, 2017 Share Posted August 12, 2017 (edited) There's a snap ring/circlip that holds the cup in place. Remove the snap ring and pull the cup out, pop it back onto the pivot ball, then it slips back into place with ease. Reinstall the snap ring. Short shifter install shows the snap ring: Edited August 12, 2017 by Fairtax4me Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now