Jump to content
Ultimate Subaru Message Board

Would you do it? 2002 LL Bean with cooked H6...


Recommended Posts

We have been offered a 2002 LL Bean Outback that was towed in with an overheated motor - this would be the 3.0 H6 with 226K on the clock

 

Body is so-so rust wise, but considering the area, not out of line... Interior is filthy, but for the most part intact - some wear evident on front seats...

 

it has been offered to us for $400

 

already looked into a motor - $1200 for a JDM with around 60K - can get cheaper but higher miles...

 

So...

 

Would it be worth messing with it?

Edited by heartless
Link to comment
Share on other sites

seems iffy given the miles,rust,filth - suppose the trans or front diff give out next? probably needs struts and some bushings, maybe the cooling system is clogged-up?

 

I suppose it depends on what else you might spend that time and money on.

 

but. I REALLY like our 03 H6 and understand why someone might want a similar beast, just dunno how I'd feel if it was in poor condition though.

Link to comment
Share on other sites

oh, i agree 100%.. however, the car was being offered to us directly by the owner of a independent shop that I occasionally go to for work...

He was called to tow the car and figure out what was wrong with it.. didn't take him long to determine that the engine was pretty well toast after loosing all it's coolant (blown lower radiator hose).

 

He knows we prefer Subarus, and thought he would give us the chance to pick it up cheaply (basically for what the current owner is into him for) IF we were interested... sounds like it is going to end up in the salvage yard at this point. The owner has no interest in trying to fix it.

 

Had the car been in better condition (aside from the engine) we would have considered it further, but in the physical condition it is in (body rust), yeah, it is just not worth messing with. My 2002 Forester L is in much better condition.. and runs. LOL

Link to comment
Share on other sites

I'm sure there are plenty of people who are in a situation to take on a risky project and it does seem like you had some more information that may have reduced the risk somewhat, but, as a casual DIYer, it would mean a LOT to me to feel what the car drives like.

 

Folks with a real shop and more experience and more time for wrenching - probably not the worst project. But, just seems like there could be better 'rolling chassis' out there to start from as a 'base'.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...