ej20 torque's after camseal replacement

[Hectus77]

Hi

 

I been replacing the camshaft seals on my ej20 non turbo sohc, 1998 legacy. Now its time to put it all back together.

 

I wonder if anyone have the torques for the cam pulleys/wheels, whatever their called in english, they have a 19mm bolt of i remember right, and does anyone know of a good trick how to avoid them to turn while fastening them?

 

i also need torques for all the timingbelt stuff including the hydraulic tensioner and crankshaft pulleybolt if anyone has that.

 

Thanks in advance.

[Gloyale]

Cam bolts very tight.

 

Crank bolt even tighter.

 

Other bolts just enough tight.

 

Excact torquing of these parts not required

[Fairtax4me]

Cam pulley bolts are around 60ftlbs

Crank bolt 140

Timing pulleys tensioner etc 30ish. Those are more of a "feel the torque" thing since sometimes torquing to the proper torque will strip the threads. I use a regular hand ratchet and snug them and they're always tight to remove again.