montermahan Posted August 31, 2017 Share Posted August 31, 2017 Does anyone know the part # or a place I can purchase one of these block half O-rings, or have one they would sell me. I have all the other gaskets to do an overhaul, and don't want to buy a complete gasket set to get one o-ring and I don't want to put the cases back together without a new one. Thank's. Link to comment Share on other sites More sharing options...
DaveT Posted August 31, 2017 Share Posted August 31, 2017 I might have a spare one, if it's what I think you are looking for. Link to comment Share on other sites More sharing options...
montermahan Posted August 31, 2017 Author Share Posted August 31, 2017 DaveT, I would love to get one from you. I don't know what it look's like because I havn't split block yet. It's the one that goes between block halves that is a water passage from one side to other. If it is what I need, would be glad to pay you what you think it's worth. Thank,s Monte Link to comment Share on other sites More sharing options...
montermahan Posted August 31, 2017 Author Share Posted August 31, 2017 DaveT, I ran into a friend that used to work for Subaru and he had a batch of of old gaskets and gave me an red o-ring about 1/2" wide-- 2" long and probably 3/32" thick. having never seen the engine apart, I hope it is the right one. Link to comment Share on other sites More sharing options...
DaveT Posted September 1, 2017 Share Posted September 1, 2017 That's the one I was thinking it might be. I do have an extra one, but it sounds like you got it. I'd have to do some checking in the fsm, etc to be 100% on it. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now