NATEUDD Posted September 13, 2017 Share Posted September 13, 2017 Hello.. I have a 1979 Wagon with a 1.6 E81 stamped engine. I have identified the carb as a Hitachi dcj-306-8 . Im struggling to find a carb to manifold mounting gasket. Aftermarket listings show a Mahle part number of a G30800. I have ordered this but is too large. I can not seem to find a part number for the gasket that will work. anyone have any ideas on a part number? Please help! Attached photo- left is the new gasket which is too big, middle is whats left of the original and the right is an imprint of the carb base 1 Link to comment Share on other sites More sharing options...
moosens Posted September 13, 2017 Share Posted September 13, 2017 Pretty sure I have an entire kit. Might have those gaskets seperate somewhere too. Will check tomorrow morning. I'm sure I have a Bosch rebuild kit new unopened. 1 Link to comment Share on other sites More sharing options...
NATEUDD Posted September 13, 2017 Author Share Posted September 13, 2017 I know I can find this gasket in a kit but curious if anyone knows a part number for this base gasket as just the single gasket? Link to comment Share on other sites More sharing options...
moosens Posted September 14, 2017 Share Posted September 14, 2017 All the FPM's out there and nobody has replied yet. Maybe some are archived here ? Link to comment Share on other sites More sharing options...
spicypeanut Posted September 16, 2017 Share Posted September 16, 2017 It might be easiest to just buy the make your own sheet and cut out what you need. instead of scouring the eternal planes of the world for some old gasket material Link to comment Share on other sites More sharing options...
naru Posted September 17, 2017 Share Posted September 17, 2017 (edited) Nippon Reinz Part Number:W0133-1643681-NRZ https://www.carid.com/nippon-reinz/carburetor-base-gasket-mpn-w0133-1643681-nrz.html?singleid=98244209&url=18401870 http://www.ebay.com/itm/Nippon-Reinz-W0133-1643681-NRZ-Carburetor-Base-Gasket/311597176299 Edited September 22, 2017 by naru Link to comment Share on other sites More sharing options...
NATEUDD Posted September 21, 2017 Author Share Posted September 21, 2017 Thanks Naru, That gasket part number worked great!! my local parts stores listed that Mahle part number as the only option, napa and oreillys which was wrong. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now