wagons Posted October 6, 2017 Share Posted October 6, 2017 I am going to connect the hill holder on my car as my wife will be driving it and she needs some help on the steep hills here in northern Arizona. How do I up hook this bad boy up? I know cable from clutch for to holder mechanism and that's about it. Is there supposed to be a bracket to hold the cable from moving around? Is there supposed to be a spring to help the mechanism go back? Any pictures and any advice would be great.thanks in advance Link to comment Share on other sites More sharing options...
Subarule Posted October 7, 2017 Share Posted October 7, 2017 I can't tell you how to connect it but did want to say that mine has never been disconnected and I do use it. Very useful thing to have. Link to comment Share on other sites More sharing options...
wagons Posted October 7, 2017 Author Share Posted October 7, 2017 Yeah its great especially for new manual trans drivers. I found a diagram I will be taking pictures as I do it. Hopefully I can get it to work Link to comment Share on other sites More sharing options...
subpoop Posted August 20, 2018 Share Posted August 20, 2018 just fixed a friend of mines hill-holder, his was frozen so every time he went to use his clutch it froze the brakes. bought a used one at pull and save and new brake rotors and calipers and pads and his gas milage went way up. Link to comment Share on other sites More sharing options...
Subasaurus Posted August 20, 2018 Share Posted August 20, 2018 (edited) about 2 years ago on my 89 GL my hill holder actually failed on me in a weird way, sometimes when at an uphill, the hill holder wouldn't release after releasing the clutch pedal, ended up discontinuing it and just letting it live in the engine bay uselessly, was a cool little feature though i do have to say, reminds me of a Studebaker. i know the cable comes from the front to the rear direction, opposite from a clutch cable on a fork, it's held in place by a U tab, like the one that holds the brake like on the front of an EA82 Strut, there's also a tiny almost impossible to find nut in the rear of it for adjustment, i do have a few examples in my possession if you want some really close up pictures of one? Edited August 20, 2018 by Subasaurus Link to comment Share on other sites More sharing options...
Subarule Posted August 20, 2018 Share Posted August 20, 2018 Mine always worked great on my '86 GL until I had the clutch & flywheel replaced. Then the hill holder locked up the brakes, so had it disconnected. I'd like to get get it working properly again. Link to comment Share on other sites More sharing options...
wagons Posted August 21, 2018 Author Share Posted August 21, 2018 Hey Subasaurus, I can definitely use some guidance, pictures anything to get this bad boy to work. Just getting around to my exedy clutch job so it's going to start being put back together here soon! Link to comment Share on other sites More sharing options...
Subasaurus Posted August 21, 2018 Share Posted August 21, 2018 11 hours ago, wagons said: Hey Subasaurus, I can definitely use some guidance, pictures anything to get this bad boy to work. Just getting around to my exedy clutch job so it's going to start being put back together here soon! alright, ill post them up tonight or tomorrow morning. love the exedy clutch, I put it on my impreza as a stage 1, abuse the hell out of it, and it's held up for over a year and still like new, longer than any other clutch i've ever had on there, and i've gone through a few already. Link to comment Share on other sites More sharing options...
moosens Posted August 22, 2018 Share Posted August 22, 2018 Don’t neglect the wire clips that hold he throw out bearing in place. And that adjustment you want to start with 1/8” gap. Some might say 1/4” but to me it’s 1/8” and life begins there for hill holder balance. It sure can be a pain. And that tiny nut as well. Look for a diagram from an online manual if you can search one out. Link to comment Share on other sites More sharing options...
Subasaurus Posted August 22, 2018 Share Posted August 22, 2018 (edited) the picture hosting wesite i always use is down at the moment so here's a tiny picture from this other substitute place. is this what you're talking about wagons? Edited August 22, 2018 by Subasaurus Link to comment Share on other sites More sharing options...
Jmpjose Posted August 22, 2018 Share Posted August 22, 2018 Hello, here is my set up just got mine working again. bottom cable is clutch, and upper is brake cable. Link to comment Share on other sites More sharing options...
Subarule Posted August 25, 2018 Share Posted August 25, 2018 That is a great photo! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now