Theoneills Posted October 15, 2017 Share Posted October 15, 2017 I think this is connected to the coolant bypass and seems to contain a spring. Could it regulate pressure? https://www.amazon.com.au/clouddrive/share/rwswVE7EgA62Soc3jOMegJ0TGIW5MdRlvtAlHbAVYWF Link to comment Share on other sites More sharing options...
pksjeep Posted October 15, 2017 Share Posted October 15, 2017 I think it is a valve that heats up and allows coolant to flow/or stop flowing to the carb. Link to comment Share on other sites More sharing options...
Turbone Posted October 15, 2017 Share Posted October 15, 2017 Possibly, it also appears that a nipple is broken off Link to comment Share on other sites More sharing options...
Gloyale Posted October 15, 2017 Share Posted October 15, 2017 I think it is a valve that heats up and allows coolant to flow/or stop flowing to the carb. It's thermovalve that was used on the EA81 manifolds. It's between the Intake coolant passage and the heater core return. It can be eliminated and use just a elbow or bendable hose to complete the connection. Link to comment Share on other sites More sharing options...
Theoneills Posted October 15, 2017 Author Share Posted October 15, 2017 Thanks to you both. I bypassed it and it’s back running like a dream but I’ve heard that if eliminated it can cause rising temps? Link to comment Share on other sites More sharing options...
Theoneills Posted October 16, 2017 Author Share Posted October 16, 2017 Further to my previous reply. I live in Queensland Australia where the avg daytime temp is mid 20 celcius in winter and high 20’s in Summer so I’m inclined to block the water passage rather than bypass it. Any thoughts? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now