Evil02outback Posted October 20, 2017 Share Posted October 20, 2017 So I put a engine in a car for my sister, and after firing it off it got the normal white smoke on initial start off and burnt it out like I normality do. but after sitting a couple of days I go to fire it off again and I get the smoke (what I thought was steam) figuring a head gasket failed, I pulled the engine and the heads to my surprise it’s a bit of oil in the cylinders. I pulled the pistons out and the oil rings are not springing out like they should ( I can slide the piston back in up to the second compression ring) so my question is: can I clean the pistons up or do I need to get a new ring set... and if I do what is the best inexpensive set out there I’m having to do this on a budget. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 20, 2017 Share Posted October 20, 2017 New rings. Get NPR rings. GD 1 Link to comment Share on other sites More sharing options...
Evil02outback Posted November 3, 2017 Author Share Posted November 3, 2017 I have found where to get them but I can’t figure out which ones to get is there a part number for phase 2 2.5 Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 3, 2017 Share Posted November 3, 2017 Need to know year. Link to comment Share on other sites More sharing options...
Evil02outback Posted November 3, 2017 Author Share Posted November 3, 2017 2002 outback wagon Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 3, 2017 Share Posted November 3, 2017 SWF20066ZZ-0 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now