jono Posted November 22, 2017 Share Posted November 22, 2017 I have bought reconditioned HVLA's from Mizpah Precision Mfg Inc on your recommendations in here. Very happy with product and service. I spoke to the owner just now regarding another set for my next build. He has no cores to be able to just send more out to people like me not so close - I am 'down under' hanging off the globe by sheer luck I think. I guess to save Phil from going broke buying all the dormant hvlas in the US contact him before going to the trouble mizpah@paulbunyan.net 11522 Bartlett Avenue Mizpah MN 56600 I think a lifter weighs 80 to 100 grams per lifter. So max of 3oz each? Join the search Phil is willing to pay for your old cores. He was offering me $US2 a core to help offset postage It sounds like it is time for the Subaru community to rummage sheds for those old EA82 cores, get your hands dirty to retrieve them and send them in....better than cash for scrap cans huh? Link to comment Share on other sites More sharing options...
ferp420 Posted November 23, 2017 Share Posted November 23, 2017 If i give up my cores then i wont have them when i need to have them rebuilt ea82 parts are getting hard to find im not giving up anything till im done with the ea82 i havent been hording parts cause they look good Link to comment Share on other sites More sharing options...
idosubaru Posted November 23, 2017 Share Posted November 23, 2017 i havent been hording parts cause they look good HA HA HA!!! if i cared about signatures i'd quote that for awhile. Link to comment Share on other sites More sharing options...
jono Posted November 23, 2017 Author Share Posted November 23, 2017 I should have a heap given the engine mount count in hoard....eight sets, then found another so tossed two sets. I have several lifters stuck in heads and do not follow instructions found here. They are stuck fast. Link to comment Share on other sites More sharing options...
Gloyale Posted November 23, 2017 Share Posted November 23, 2017 hmmm I got a fews sets and no plans for building another EA82. Link to comment Share on other sites More sharing options...
jono Posted November 23, 2017 Author Share Posted November 23, 2017 Gloyale is the sort we need! All those others who bag out EA82 ( not at all suggesting Gloyale does this) and have these bits kicking about you are who we need to help those like me sticking to the EA platform. I think I tossed a huge number thinking can just buy new ones but the metals used in new one apparently not the same as Fuji used. I also like the idea of someone taking some care to reco them more than someone or thing in a far away Chinese factory... Link to comment Share on other sites More sharing options...
jono Posted November 28, 2017 Author Share Posted November 28, 2017 Well, had to pull one apart didn't I? I had a few stuck in a few heads and while I had my split press plate out used a couple bolts to pull most out in o e piece But, a pair decided to hold on so tight I busted the hvla top cap and the guts came out. Maybe this time I will remember....there is no rubber seal in these things! Just a plunger and its spring and down below a ball bearing in its retainer and small spring So what does a recondition involve, just a clean out? Must be some long change intervals to gunk these babies up over the years. I found my set to send all the way to Mizpah ...yeehah Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now