Naked Buell Posted November 23, 2017 Share Posted November 23, 2017 Ok guys, question for the ones running the ea81. I have an 85 Brat that I am putting in the Ej 2.2T. I have the ej engne in and am working on the wiring. I want to have the ea oil pressure gauge working. I know I have to put in the ea sender into the ej. My question is for the ones that can just look at their cars would be easy. I have the stock ea wiring still in the Brat. I want to know which plug and which wire is the oil pressure gauge from the engine bay that I can just splice into. Thx guys. Link to comment Share on other sites More sharing options...
86BRATMAN Posted November 23, 2017 Share Posted November 23, 2017 On mine I used the ej harness to run the signal into the cabin, then tapped into the back of the cluster. I left my setup completely reversible just in case for some reason I ever decided to go back to the ea81t. Link to comment Share on other sites More sharing options...
jono Posted November 24, 2017 Share Posted November 24, 2017 Oil pressure switch wire for EA81 look for yellow with black trace. If it has factory connector was clear likely yellow opaque now insulator on a right angle female spade Link to comment Share on other sites More sharing options...
Naked Buell Posted November 24, 2017 Author Share Posted November 24, 2017 Cool. I will do some checking. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now