jchandler01 Posted December 1, 2017 Share Posted December 1, 2017 Not computer savvy so cannot get back to a thread I was reading. Has anyone yet found part supplier for solenoid valve AESU128-34. Little connector piece broken on mine. Probably happened years ago when mechanic changed out carb. Has always idled high since but ran perfect otherwise. Now has to go thru Ca smog check legally and took 3 months of not finding where dangling hose belonged and one good smog check fellow to point out the broken connection. Said "get another'. Dealer has no leads. Link to comment Share on other sites More sharing options...
skishop69 Posted December 2, 2017 Share Posted December 2, 2017 (edited) No, there are no suppliers. You'll have to remove the glue/epoxy from the end of the solenoid where it supports the wire and get some of the insulation off the wire. strip the other end of the wire and solder them together. Reapply epoxy to cover the solder and support the wire. Btw, this solenoid has nothing to do with idle speed. Edited December 2, 2017 by skishop69 Link to comment Share on other sites More sharing options...
BEECHBM69 Posted December 2, 2017 Share Posted December 2, 2017 Not computer savvy so cannot get back to a thread I was reading. Has anyone yet found part supplier for solenoid valve AESU128-34. Little connector piece broken on mine. Probably happened years ago when mechanic changed out carb. Has always idled high since but ran perfect otherwise. Now has to go thru Ca smog check legally and took 3 months of not finding where dangling hose belonged and one good smog check fellow to point out the broken connection. Said "get another'. Dealer has no leads. This may have been the thread you were searching for: http://www.ultimatesubaru.org/forum/topic/32704-egr-solenoid-valve-broken/ It looks like ski was referencing the anti diesel solenoid. Good luck! Dan Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 2, 2017 Share Posted December 2, 2017 The updated part number is made by Redline Weber (division of World-Pac) and is 32-36DGEV GD 1 Link to comment Share on other sites More sharing options...
robm Posted December 4, 2017 Share Posted December 4, 2017 GD, that is the 49 state version... Link to comment Share on other sites More sharing options...
naru Posted December 4, 2017 Share Posted December 4, 2017 PM sent Link to comment Share on other sites More sharing options...
wagons Posted December 4, 2017 Share Posted December 4, 2017 Send a picture to me. I have a Weber now and have all my emissions from my crap....tachi Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now