AKghandi Posted December 3, 2017 Share Posted December 3, 2017 This will be the build log for my new XT6 I just bought 2 XT6s one is parts and one will be a builder. The parts car is an 87 and the driver is a 1991 parts car is stick and the driver is auto. The plan so far is to first fix and clean the driver. The rear window is broken so that's the first step. And since the window has been broken for almost a decade the interior is shot. The parts car interior is actually pretty nice so I'll be swapping that. Long term will include the standard offroad goodies. lift, tires, lights, winch, snorkle. Not sure how I will be lifting it yet, and not sure which trans I will be going with. Lift; either outback struts front and accord/4runner in the rear with crossmember drop, not sure if the camber/castor will work. or standard ea82 2" lift. Trans; dual range swap, I have all the parts. or outback 4.44 4eat swap. From reading it wouldn't be that hard to switch bell housings and wire it. I will also have a 5 lug swap for sale soon. to help fund this escapade No pics right now it was dark when I brought the first one home. I still need to get the other one. which will be in a week or so. Link to comment Share on other sites More sharing options...
AKghandi Posted May 14, 2018 Author Share Posted May 14, 2018 Bet you thought this was a dead post huh? Wrongo bongo its just getting started. Link to comment Share on other sites More sharing options...
AKghandi Posted May 14, 2018 Author Share Posted May 14, 2018 So hopefully today I will be picking up the other car. The wife has given the ok for all the shenanigans I have planned for it, so things should start moving here soon Link to comment Share on other sites More sharing options...
el_freddo Posted May 15, 2018 Share Posted May 15, 2018 Sounds good mate. Keep a posted on the updates! Smash it with pics too Cheers Bennie Link to comment Share on other sites More sharing options...
AKghandi Posted May 15, 2018 Author Share Posted May 15, 2018 (edited) double post Edited May 15, 2018 by AKghandi Link to comment Share on other sites More sharing options...
AKghandi Posted May 15, 2018 Author Share Posted May 15, 2018 This is the car I'll be building. She is pretty rusty but only on the outer sheet metal, all the structural points are still good. its been sitting since 07 and it fired right up and drove onto the trailer. Link to comment Share on other sites More sharing options...
AKghandi Posted May 22, 2018 Author Share Posted May 22, 2018 Not much to update as of yet, started pulling the interior, i plan to replace everything from the dash back. But before I do that I'm going to get the floors patched. I did get a set of wheels and tires, 235/75r15s on cherokee basket weave rims. I'll be using adapters to make them bolt up. I also have decided to do the car in a RC car motif. The car also wasnt running right, after swapping a few parts from the parts car I think I found the culprit in a bad CTS I have 2 cars i'll be selling soon to fund this so things will pick up soon. Link to comment Share on other sites More sharing options...
AKghandi Posted May 22, 2018 Author Share Posted May 22, 2018 these are the tires and wheels I'll be using, I think they will match the early 90s RC car image I'm going for. Link to comment Share on other sites More sharing options...
AKghandi Posted May 22, 2018 Author Share Posted May 22, 2018 Link to comment Share on other sites More sharing options...
AKghandi Posted May 22, 2018 Author Share Posted May 22, 2018 I've got my work cut out for me thats for sure Link to comment Share on other sites More sharing options...
AKghandi Posted June 2, 2018 Author Share Posted June 2, 2018 Things have been moving along, gutted the bad interior and swapped the rear window. thats the biggest hurdle done. got a huge shopping list coming from rock auto soon, but next thing to tackle is rust. Link to comment Share on other sites More sharing options...
AKghandi Posted June 2, 2018 Author Share Posted June 2, 2018 outback strut assemblys, 4runner struts and accord springs on the way. plus new brake hoses and pads Link to comment Share on other sites More sharing options...
el_freddo Posted June 3, 2018 Share Posted June 3, 2018 Geez that rear glass swap would've been a nerve wracking delicate operation! Has your heart rate dropped yet? Cheers Bennie Link to comment Share on other sites More sharing options...
AKghandi Posted June 3, 2018 Author Share Posted June 3, 2018 Yeah that was the make or break on this project. After all when it broke the last time the car got parked for 10 years Link to comment Share on other sites More sharing options...
AKghandi Posted June 13, 2018 Author Share Posted June 13, 2018 Got a bunch of parts in the mail. Pulled the carpet out of the parts car so I could get a look at the floors, thankfully they are in much much better shape so I will be able to swap them over. There is still some minor rust through, but only in small spots that I should be able to fix. The important mounting points are still solid. right now I am waiting on a spot weld drill bit to show up so I can get it pulled apart and start patching the floor before I weld it into the other car. Link to comment Share on other sites More sharing options...
Drano Posted September 7, 2018 Share Posted September 7, 2018 Wow, that is a big job - but good to see another one being saved! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now