rosebudrex Posted January 8, 2018 Share Posted January 8, 2018 hello and thanks for any info! ive been all over the net and all thru the chiltons manual for two days, cant find the location of the Transmission Contol Module ? my gl wont shift out of first gear , i have replaced the electronic kiick down sylenoid and the govenor / modulator on the transmission, my next step is the TCM, cant seem to find its location? cant find any good diagrams for this old ride either????thank you, rex Link to comment Share on other sites More sharing options...
DaveT Posted January 8, 2018 Share Posted January 8, 2018 There is no electronic control of this transmission. It's all controlled by hydraulics. Link to comment Share on other sites More sharing options...
john in KY Posted January 8, 2018 Share Posted January 8, 2018 Check the modulator vacuum line. May be disconnected at the engine. No vacuum, no upshift. Link to comment Share on other sites More sharing options...
Gloyale Posted January 8, 2018 Share Posted January 8, 2018 Check the modulator vacuum line. May be disconnected at the engine. No vacuum, no upshift. the governor is what controls upshifts. if you replaced it and it still not shifting, then the gear on the output shaft that drives the governor is toasted. trans is shot. Link to comment Share on other sites More sharing options...
DaveT Posted January 8, 2018 Share Posted January 8, 2018 Yes, governor and that vacuum modulator. That's it, except for internal failure. Modulator should be number 1 thing to check. If it's original, it should have failed by now. Link to comment Share on other sites More sharing options...
jono Posted January 8, 2018 Share Posted January 8, 2018 (edited) Has a basic look been done to it for starters before leaping into harder things, like pan off, inspect and replace filter and fluid. A number of bung plugs on the side can be opened and hooked up for pressure tests - have you any fluid pressure gauges etc Have to admit I got a from you looking for the 3 speeds TCM Lucky I didnt answer first as I might have suggested you follow the wiring connections from the trans to find the module :)I Edited January 8, 2018 by jono Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 9, 2018 Share Posted January 9, 2018 He's dead Jim. Link to comment Share on other sites More sharing options...
rosebudrex Posted January 10, 2018 Author Share Posted January 10, 2018 Thank you , everyone who replied. I do wonder where i can find reference for the light codes on Electronic Control Module its under the steering column , Hitachi AA 392 has blinking red light ? any ideas? Link to comment Share on other sites More sharing options...
DaveT Posted January 10, 2018 Share Posted January 10, 2018 That is the engine control unit. The list of codes has been posted in many threads. Count the slow blinks, and the fast blinks as a 2 digit number. Post them, and we can look them up. Slow is 10s place. Fast is 1s place. Link to comment Share on other sites More sharing options...
czny Posted January 10, 2018 Share Posted January 10, 2018 That is the engine control unit. The list of codes has been posted in many threads. Count the slow blinks, and the fast blinks as a 2 digit number. Post them, and we can look them up. Slow is 10s place. Fast is 1s place. http://www.ultimatesubaru.org/forum/topic/47526-subaru-ecu-codes-for-1983-1988/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now