Rooster2 Posted January 20, 2018 Share Posted January 20, 2018 I can't figure how to remove the glove box. I removed 2 screws from the top, but now I don't know what to do. I figure someone here is smarter then me, to give me good directions. Thanks................Rooster2 1 Link to comment Share on other sites More sharing options...
Gloyale Posted January 20, 2018 Share Posted January 20, 2018 couple more down low near the hinges for the glove box Link to comment Share on other sites More sharing options...
Rooster2 Posted January 20, 2018 Author Share Posted January 20, 2018 couple more down low near the hinges for the glove box Yes, I see two screws on each side down low, but can't figure out how to get a screw driver on screw heads. The bottom edge of glove box door is in the way. I tried a "Z" shaped screwdriver, but no luck with it. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted January 20, 2018 Share Posted January 20, 2018 might be some similarity to instructions for cabin air filter change in 2nd gen ? check cars101.com . or youtube videos? Link to comment Share on other sites More sharing options...
djmark7 Posted January 21, 2018 Share Posted January 21, 2018 leave door closed unscrew from hinges on bottom 2 screws on each side then release door and 'presto' 2 Link to comment Share on other sites More sharing options...
Rooster2 Posted January 21, 2018 Author Share Posted January 21, 2018 leave door closed unscrew from hinges on bottom 2 screws on each side then release door and 'presto' Thanks, gotter done. It wasn't the easiest thing to figure out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now