LameRandomName Posted June 26, 2004 Share Posted June 26, 2004 I did my plugs & wires this moring.... (2000 Forester) I did the rear driver's side first, because it looked to be the hardest. And it was... snaking my hands and tools into that cramped spot... When it came time to put the boot on the new plug, I couldn't get it on, so I resigned myself to removing a few items to open up that area. Imagine my surprise when it was only two bolts to get the windshield washer fluid tank out of the way. Doh! At least I had only gotten halfway through, and on the passanger side i removed the intake ducting first. (3 bolts) Other than removing a total of 5 bolts to get a clear shot at the plugs, this was just as easy as my 1978 DL. Nice. Link to comment Share on other sites More sharing options...
northguy Posted June 26, 2004 Share Posted June 26, 2004 Are you looking for confirmation of your thread title? At least you had common sense enough to do some problem solving instead of just pushing on and getting sore knuckles and broken parts. Link to comment Share on other sites More sharing options...
LosDiosDeVerde86 Posted June 28, 2004 Share Posted June 28, 2004 i just put new plugs in my 96 leg and it was pretty easy...........minus, like you said, rear drivers side, but i managed without dissasembling anything. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now