calebz Posted July 2, 2004 Share Posted July 2, 2004 off topic 88 RX sedan, some one just told me of 2 GL-10s parting in SA.. said one still had the motor. So if you are looking for parts, let me know and I will get in contact with the guy /offtopic Link to comment Share on other sites More sharing options...
nkx Posted July 4, 2004 Author Share Posted July 4, 2004 are you gonna keep the 4WD plenum when you hook your hoses up, 88rx? i took that bracket/heatshield out. (mainly because i was in a rush and i crossthreadded the passenger side bolt and broke the head off... oops) Link to comment Share on other sites More sharing options...
nkx Posted July 10, 2004 Author Share Posted July 10, 2004 bump! Link to comment Share on other sites More sharing options...
Turbone Posted July 10, 2004 Share Posted July 10, 2004 Nice work on the fabrication, Dave. BUT, I'm a little surprised that someone that lives in W. Wa. would have a intake like that so close to the ground. Keep us updated when it rains :-p It looks like your not afraid to cut sheet metal, so if your not using the spare tire area this would be a good place to mount the intake. Isolate it by building a wall around it, then put a scoop on the hood. I think this would give more air and keep it away from the water. Link to comment Share on other sites More sharing options...
suberdave Posted July 11, 2004 Share Posted July 11, 2004 your right im not to worried about water / rain, there is no way for rain to realy get into the filter it is surounded by the fender front splash sheld (for lack of a better word), and the fender liner. and if its raining hard enough for large puddles that i may have to forge... thats what i have my other subaru for. a little rain wont hurt this one. if this one suckes up water... im gonna start bulding a subaru powered boat -=suberdave=- Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now