Gwywnc Posted May 22, 2018 Share Posted May 22, 2018 I have a 1984 Subaru gl. So I was driving the other day and noticed that when I turned the wheel to the right that it turned more than normal to turn then turning back to the left it turned from that point so that going straight the steering wheel was pointed to the right like I was making a right turn but I was going straight if that makes sense. So I go home and wth the wheels pointed straight it will immediately turn left when he wheel is turned like it should but when turning it right it wouldn’t immediately turn and seems that the slower I turned the wheel to the right the longer it took for the wheels to start turning even tho the wheel was being turned. Any suggestions. Seems super dangerous and I’m afraid to drive it like this. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 22, 2018 Share Posted May 22, 2018 Probably the steering column u-joint/rag joint. Get a urethane one for a VW beetle. Direct replacement. GD 1 Link to comment Share on other sites More sharing options...
Gloyale Posted May 22, 2018 Share Posted May 22, 2018 Probably the steering column u-joint/rag joint. Get a urethane one for a VW beetle. Direct replacement. GD Pretty sure power steering models didn't have a rag joint. Check the linkage obviously, but I would guess it's a valving issue int eh rack. I had one that failed somehow and made for WAAAY over boosted steering with no feeling of return to center. One little touch of the wheel would shoot you off into the ditch practically. Link to comment Share on other sites More sharing options...
Gwywnc Posted May 22, 2018 Author Share Posted May 22, 2018 There is a rag joint but that’s not the problem. I’ll look it over again after the rain. I don’t think it’s anything visible. Link to comment Share on other sites More sharing options...
lrgvanman Posted May 22, 2018 Share Posted May 22, 2018 The rag joint I just replaced on my non-power steering system was one of two left at the Eugene Subaru dealer. Though I don't know whether power steering systems run these, they are available elsewhere under the part number "731336000 Rubber Coupling AY" and if Googled, they will show in numerous sources if it helps. Link to comment Share on other sites More sharing options...
el_freddo Posted May 22, 2018 Share Posted May 22, 2018 There is a rag joint but that’s not the problem. I’ll look it over again after the rain. I don’t think it’s anything visible. If it's nothing visible I'd be either pulling the rack out to inspect it internally - a full strip down to do this, or have someone do the steering wheel work (front wheels on some magazines) while you're looking at how everything under the bonnet is working. I'm with GD - it seems like a rag joint issue. Cheers Bennie Link to comment Share on other sites More sharing options...
Gloyale Posted May 23, 2018 Share Posted May 23, 2018 There is a rag joint but that’s not the problem. I’ll look it over again after the rain. I don’t think it’s anything visible. there should be no rag joint on a Factory Power steering equipped 84 EA81 car. I just went out to my completely stock, 1984 EA81 sedan and looked. If you have a rag joint, you DO NOT have power steering. 1 Link to comment Share on other sites More sharing options...
el_freddo Posted May 23, 2018 Share Posted May 23, 2018 My Brumby's power steering came from an '84 touring wagon - has a rag joint and a Uni joint. Same for our other converted brumby. Both have rag joints. Yours hasn't been swapped for another double Uni joint unit in it's life?? Cheers Bennie Link to comment Share on other sites More sharing options...
Subaru Scott Posted May 23, 2018 Share Posted May 23, 2018 My rag top has a rag joint Stock 83 w/ps. The observation that the wheel can be crooked intermittently while going straight means the fault is in the mechanical connection, not the hydraulic valving. Has to be u-joint or rag joint, and I don't see a u-joint failing with that much play all of a sudden. Can't imagine a tooth shearing off the rack or pinion. And I would say if that were the case, there would be some binding going on as well. Rag joint. "When the rain stops"... You mean sometime in June? 1 Link to comment Share on other sites More sharing options...
Dee2 Posted May 23, 2018 Share Posted May 23, 2018 Have someone turn the steering wheel while you watch what's happening under the hood. You'll see the problem and then can get whatever is needed. 1 Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 23, 2018 Share Posted May 23, 2018 (edited) Gloyale is at least partially correct. The 84 PS setup doesn't use a rag joint. Neither does the EA81T.... 83 should be the same I would think.... 82 might. I'm not sure. There are some differences. Regardless the OP said he does have a rag joint so..... Sounds like if it's not the rag or the coupler that the rack is bad or the problem is higher up in the column like the u-joint for the tilt.... IDK. Sounds like its pretty messed up. Never had one of these do that to me. GD Edited May 23, 2018 by GeneralDisorder Link to comment Share on other sites More sharing options...
Gwywnc Posted May 23, 2018 Author Share Posted May 23, 2018 So I seen this the other day but had no one to turn the wheel for me. So I called my daughter over to help me and here’s the problem. 2 missing bolts on one side allowing the whole thing to slide back and forth and even pulling the casing out. Seems like a easy fix. Wish me luck Link to comment Share on other sites More sharing options...
Gwywnc Posted May 24, 2018 Author Share Posted May 24, 2018 Is this a rag joint? This was a one owner 1984 Subaru gl and all I’ve done to it was change it from a automatic to four speed dial range. Link to comment Share on other sites More sharing options...
Gwywnc Posted May 24, 2018 Author Share Posted May 24, 2018 Here’s the two bolts that fell out. Seems kinda funny both on one side but what ever. Hopefully easy fix. Wish me luck Link to comment Share on other sites More sharing options...
Subaru Scott Posted May 24, 2018 Share Posted May 24, 2018 Is this a rag joint? This was a one owner 1984 Subaru gl and all I’ve done to it was change it from a automatic to four speed dial range. Yeah, that's yer rag joint there above the u-joints. So, do you have a sedan, wagon, hatch or coupe? Link to comment Share on other sites More sharing options...
Gwywnc Posted May 24, 2018 Author Share Posted May 24, 2018 Wagon I would guess. 4 door with a door in the back. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now