jono Posted May 24, 2018 Share Posted May 24, 2018 Anyone removed these? Looks like rubber is bonded to a flat but about 70 mm. Would expect something like an M10 stud Link to comment Share on other sites More sharing options...
carfreak85 Posted May 25, 2018 Share Posted May 25, 2018 There is a stud embedded in the rubber, IIRC. I've never had luck removing them (granted, I haven't tried very hard) but I would thing you could slit the rubber to expose the stud then turn it out with some vice-grips. Link to comment Share on other sites More sharing options...
jono Posted May 26, 2018 Author Share Posted May 26, 2018 I should have added I do not want to destroy, just ' tinker' Thanks for reply Link to comment Share on other sites More sharing options...
el_freddo Posted May 26, 2018 Share Posted May 26, 2018 Good luck without destroying them at this age! Have a new set on hand if you're going to try and remove your ones. Cheers Bennie Link to comment Share on other sites More sharing options...
moosens Posted May 26, 2018 Share Posted May 26, 2018 They turn out. Or at least when they will allow you to turn them out. I’ve got a set of new for 70’s which are probably the same as 80’s Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now