Calemardo Posted July 26, 2018 Share Posted July 26, 2018 Hello all, I'm chasing a part for my 1988 Brumby. I've spoken to a heap of people and done some searching to no avail. I believe the part is a Bowl vent valve? Or an idle cut off solenoid(See attached photos). I'm a little unsure which. Link to comment Share on other sites More sharing options...
Calemardo Posted July 26, 2018 Author Share Posted July 26, 2018 1 Link to comment Share on other sites More sharing options...
pitscars Posted July 26, 2018 Share Posted July 26, 2018 I might have one - will get back to you. Link to comment Share on other sites More sharing options...
Calemardo Posted July 26, 2018 Author Share Posted July 26, 2018 Appreciate it mate Link to comment Share on other sites More sharing options...
pitscars Posted July 27, 2018 Share Posted July 27, 2018 Yes - I do have one - how does $20 + postage sound ? --------- it is connected to the small carby loom which also goes to the auto choke and fuel cutoff - so I guess I will just cut the wire and you can join it to your existing wiring ? You can private message me your details Cheers Link to comment Share on other sites More sharing options...
Calemardo Posted July 27, 2018 Author Share Posted July 27, 2018 Should be 2 wires, 1 short earth and another longer one that goes to a white connector? The wire is easily removed from the connector. I need them intact because my wiring was literally melted out hahahahhaa. Price is more than fine to me. Can you please post some photos? Link to comment Share on other sites More sharing options...
pitscars Posted July 29, 2018 Share Posted July 29, 2018 yes - small earth wire and I managed to get the wire out of the connector - I am positive its the right part - our camera wont take a 2MB picture and I don't have a mobile phone - message me your address and I will get it posted ASAP Cheers - I tested it and it works fine Link to comment Share on other sites More sharing options...
jono Posted July 29, 2018 Share Posted July 29, 2018 Looks like a bowl vent. Didn't spray degreaser while engine running did you? I did once and got similar look to things Link to comment Share on other sites More sharing options...
Calemardo Posted July 29, 2018 Author Share Posted July 29, 2018 Hahahaha! No, I was just driving along and it died, tried to start it again and it wouldn't run, then I noticed some smoke coming from the engine and discovered that little mess Link to comment Share on other sites More sharing options...
jono Posted August 1, 2018 Share Posted August 1, 2018 better check remaining wiring to see wires still have power and earth and not shorting somewhere else before fitting replacement Link to comment Share on other sites More sharing options...
Calemardo Posted August 2, 2018 Author Share Posted August 2, 2018 Good idea, will do mate. Thanks for the reminder. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now