Nug Posted June 29, 2004 Share Posted June 29, 2004 ...that Centerforce makes clutches for old soobs? Time for a pressure plate! http://www.performanceintl.com/shop/model.cgi?comp=cf_imp&make=SUBARU Link to comment Share on other sites More sharing options...
chef_tim Posted June 29, 2004 Share Posted June 29, 2004 To bad they skip right over the EA82 series cars:( . Tim Link to comment Share on other sites More sharing options...
Nug Posted June 29, 2004 Author Share Posted June 29, 2004 Oh, That sucks. Link to comment Share on other sites More sharing options...
Dr. RX Posted June 29, 2004 Share Posted June 29, 2004 So Tim, are you saying that an EA81 clutch won't work in an EA82?? I've alway wanted to put one of these in my 86 GL-10, but could justify the expense for the value of the car. I did put one in my WRX though. I consider these the best clutches in the world, I've had them in three different vehicles and they were a major improvement over the original clutch. In my Mitsubishi 3000 GT VR4, with the stock clutch, if you were idling and slowly let out the clutch, it would stall, but with the CenterForce, you could let out the clutch and it would slowly engage and move forward. With the centrifical force design, the higher the rpms, the more the clutch grips. Link to comment Share on other sites More sharing options...
Nug Posted June 29, 2004 Author Share Posted June 29, 2004 Meeky Moose just told me that an XT6 clutch will work on my RX, so that's cool. Getting the title transferred in a couple hours. Sweet! Link to comment Share on other sites More sharing options...
calebz Posted June 29, 2004 Share Posted June 29, 2004 Unless I missed something, they don't have the XT6 clutch either. Link to comment Share on other sites More sharing options...
Nug Posted June 29, 2004 Author Share Posted June 29, 2004 I mean, a standard replacement xt6 clutch. The title has been transferred, and I have plates. Now it's legal. Yay! Link to comment Share on other sites More sharing options...
chef_tim Posted June 29, 2004 Share Posted June 29, 2004 No, I'm not saying that there is/is not interchangability. Just that they omited a huge block of cars. Actually, now that I think about it, EA81 and EA82 clutch disks are NOT interchangable, they have a different size hole in the middle. Link to comment Share on other sites More sharing options...
88rxsedan Posted June 29, 2004 Share Posted June 29, 2004 i put the xt6 clutch flywheel crap in my rx, still dosent hold worth **** Link to comment Share on other sites More sharing options...
JWX Posted June 29, 2004 Share Posted June 29, 2004 so has anybody ever used these in a EA-81 car before? Link to comment Share on other sites More sharing options...
Nug Posted June 30, 2004 Author Share Posted June 30, 2004 Time to harrass Centerforce until they make EA-82 pressure plates? Link to comment Share on other sites More sharing options...
JWX Posted June 30, 2004 Share Posted June 30, 2004 I would if I was you Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now