jono Posted August 7, 2018 Share Posted August 7, 2018 I will start to load pics.... Link to comment Share on other sites More sharing options...
jono Posted August 7, 2018 Author Share Posted August 7, 2018 Continuing Link to comment Share on other sites More sharing options...
jono Posted August 7, 2018 Author Share Posted August 7, 2018 Sorry for upside down... Link to comment Share on other sites More sharing options...
jono Posted August 7, 2018 Author Share Posted August 7, 2018 Engine plugs Link to comment Share on other sites More sharing options...
el_freddo Posted August 7, 2018 Share Posted August 7, 2018 Cool diagrams Jono! Have you not managed to find a factory pin out for this yet? You should try to find a gen2 ej22 pin out and see if it's the same. Cheers Bennie 1 Link to comment Share on other sites More sharing options...
jono Posted August 8, 2018 Author Share Posted August 8, 2018 I have more to enter for the brown and grey engine plugs when the system allows me to shove more MB in this post. Great photo arrange skills too eh ? I got to look at factory manuals at a dealership and nothing in chapter 2.7 that I could find for ECU pinouts :( Going back when no real mechanics about to peruse chapter 6.3 to see if it has a wiring diagram with wire colours. Not urgent, but would love to have the stuff together before I need it. Shoot, after hearing the 8 intakes valves suck in air I think I want an EJ20 under the bonnet. Also may try the EA cases from DR to slap, yeah, "JUST" just slap around the AWD box and fit up behind an EA82 of some sort. The buggered AWD EA centre diff discovery has really peed me off Might be time to alter EJ AWD boxes to fit between EA82 in the EA81 Brumby bodies Link to comment Share on other sites More sharing options...
jono Posted August 8, 2018 Author Share Posted August 8, 2018 I have USDM files that show EJ22 in the 1996 to 2001 Imps but all too different to my eye at first. may need a fresh look. Going to start from scratch and work out all the wires at engine bits like coil, injectors, sensors etc when I feel motivated. Got the other bits nearly finished to chuck in the Brumby to make sure it all works. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now