Toadspit Posted August 26, 2018 Share Posted August 26, 2018 Does anyone know off the top of their heads what the spread is on my torque converter? I'm coming up with two variations ; 10.875“ and 11.750“ I didn't think there were two different ones but I haven't worked on any 4EATs before so I wouldn't really know anyway. Thanks in advance Quote Link to comment Share on other sites More sharing options...
Toadspit Posted August 26, 2018 Author Share Posted August 26, 2018 I know the simple answer would be to pull it and measure it but I need it to get me to and from work until I locate and purchase the part so I'd like to avoid pulling it just to measure Quote Link to comment Share on other sites More sharing options...
lmdew Posted August 26, 2018 Share Posted August 26, 2018 Should be the larger of the two. I've changed a few of them 2.5 to 2.2 swaps. I've only run into a large and smaller one. You could hit a local yard and look for one with an engine removed to measure to confirm. Quote Link to comment Share on other sites More sharing options...
Toadspit Posted August 26, 2018 Author Share Posted August 26, 2018 It just dawned on me that I still have the flex plate from the 2.2. I bet I can measure those holes and prove that you are correct. Thanks for chimming in Quote Link to comment Share on other sites More sharing options...
Toadspit Posted August 27, 2018 Author Share Posted August 27, 2018 Just incase anyone else ever needs to know in the future it is the 11.750 with 23 splines Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.