Crawlerdan Posted September 7, 2018 Share Posted September 7, 2018 Hey guys, long time no chat- im working for a Subaru collector temporarily. He has a 1-86 production rx 3 door . Someone long ago messed with the car and put wrong cap and rotor on, shaved parts with a grinder, made a fool of themselves completely. We cannot for the life of us find correct parts. The distributer has the 4foot long wire to the pass side with a round black plug, screw on cap, screw on rotor, d shaped shaft. Any help would be greatly appreciated Link to comment Share on other sites More sharing options...
carfreak85 Posted September 7, 2018 Share Posted September 7, 2018 I cannot help with this issue, but a Subaru collector you say?... Go on... Link to comment Share on other sites More sharing options...
Crawlerdan Posted September 7, 2018 Author Share Posted September 7, 2018 Yep, 7 360s, xt6 s, svx plural, ff1 coupes and sedans, justys, a dozen borgward Goliath, and my old legacy on 37s. Sambar van, brats everywhere. Etc Link to comment Share on other sites More sharing options...
Silas Cruse Posted September 7, 2018 Share Posted September 7, 2018 Does it look like this : rockauto 86 rx Link to comment Share on other sites More sharing options...
Crawlerdan Posted September 7, 2018 Author Share Posted September 7, 2018 Kinda. That’s had a snap cap and I don’t see knock sensor plugs and a large black plug Link to comment Share on other sites More sharing options...
jono Posted September 8, 2018 Share Posted September 8, 2018 Hitachi dist with four pin module inside screw Down cap and vac can for 85 86 turbo in Australia use Australian numbering scheme GH617 cap and GH605 rotor LookWWW.eBay.com.au Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 8, 2018 Share Posted September 8, 2018 Send it to Philbin manufacturing and have it rebuilt/modified as needed. That unit will be 85/86 specific using a separate ignition/knock module. You could just use an NA distributor and an MSD box that has programmable boost retard. GD Link to comment Share on other sites More sharing options...
jono Posted September 9, 2018 Share Posted September 9, 2018 A collector may have a requirement to keep it factory. I have one of those msd units never used it but is designed to work with many normal standard dizzy coil combos Link to comment Share on other sites More sharing options...
Crawlerdan Posted September 9, 2018 Author Share Posted September 9, 2018 Thanks guys! There are no requirements to keep things factory. I’ll be putting an ej22 in a brat eventually. Thanks for the info! Link to comment Share on other sites More sharing options...
jono Posted September 10, 2018 Share Posted September 10, 2018 that pic of Silas's is of a NA dizzy for sure - clips, two / wires, and basic vacuum advance canister not boost retard as well Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now