LEOD Posted September 27, 2018 Share Posted September 27, 2018 Just to save myself some time, and money,I would like to figure out if it is the diff or a wheel bearing. There is a low growl when driving, and an intermittent sound when going around a corner. I am new to subaru, and have never torn apart a diff so I do not know if it is a side gear or spider gear problem, or what. Quote Link to comment Share on other sites More sharing options...
brus brother Posted September 27, 2018 Share Posted September 27, 2018 (edited) cornering sound might lend towards bearing. more when turning to one direction than another? when you are travelling straight if you turn the wheel side to side does the sound change? always indicate year and model in postings as there is oftentimes known model specific issues (i.e. Forrester right rear wheel bearings) Edited September 27, 2018 by brus brother Quote Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted September 27, 2018 Share Posted September 27, 2018 ^^^^ that plus, any change in sound with brake use? Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 27, 2018 Share Posted September 27, 2018 (edited) Wheel bearing. Bring it down to the shop and we can give you a quote. It is unlikely you want to do this yourself. GD Edited September 27, 2018 by GeneralDisorder 1 Quote Link to comment Share on other sites More sharing options...
brus brother Posted September 27, 2018 Share Posted September 27, 2018 19 minutes ago, GeneralDisorder said: Wheel bearing. Bring it down to the shop and we can give you a quote. It is unlikely you want to do this yourself. GD wish I lived closer! 1 Quote Link to comment Share on other sites More sharing options...
LEOD Posted September 28, 2018 Author Share Posted September 28, 2018 Perfect, thanks all. I really wanted it to be wheel bearing, gonna go drop $140 on them. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 28, 2018 Share Posted September 28, 2018 These are pressed in bearings. And they should not be done in an actual press. Per Subaru. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.