steve56 Posted September 28, 2018 Share Posted September 28, 2018 (edited) Im leaking a drop of oil every 4 minutes. It looks like it coming from front tip of cam/separator plate on the drives side. This is a new head resurface job, and I resealed the cam/separator plate. Can anything be done to stop the oil drip. Edited September 29, 2018 by steve56 Link to comment Share on other sites More sharing options...
john in KY Posted September 28, 2018 Share Posted September 28, 2018 My guess is you will have to redo the seals. Link to comment Share on other sites More sharing options...
steve56 Posted September 28, 2018 Author Share Posted September 28, 2018 35 minutes ago, john in KY said: My guess is you will have to redo the seals. Has new Subaru cam and crank seals. Link to comment Share on other sites More sharing options...
steve56 Posted September 29, 2018 Author Share Posted September 29, 2018 (edited) Just pulled the cam sprocket off again. Here's a picture of the back timing cover and the DS cam seal.The cam seal was just installed yesterday. Ive installed two DS cam seals and both have leaked, about one drip every three minutes. Edited September 29, 2018 by steve56 Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted September 29, 2018 Share Posted September 29, 2018 I think clogged PCV valves/hose can increase likelihood of some seal leaks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now