yournmhr Posted November 28, 2018 Share Posted November 28, 2018 Hi folks, So I'm planning a road trip in my BRAT in a few weeks, and decided to do a little preventative maintenance. Had a messy oil leak and a some ticking, so I decided to replace seals and the paper gasket on the oil pump. I think we all know what happens when you remove an oil pump on these engines... Now I'm in the market for a new (I wish) or used pump. I've found two new and one used one in Greece (car.gr), 12 new in Columbia (mercadolibre.com.co) and one new one in Mexico. There are a couple of shady looking websites (sabrmarket.xyz; nsbamall.xyz) that claim to have them new, but don't respond to emails. I've tried just about every salvage yard I can find in the PNW and I'm coming up blank... Does anyone have a specific salvage yard that they know has one? Or maybe you'd be willing to part with one yourself? It's been three weeks of scouring the internet and I've exhausted every option I can think of. Next step is to see if a skilled machinist/welder friend of mine can weld it back together and then mill off the weld material. TL;DR: If anyone has an EA81 oil pump available (in any condition other than cracked) I would pay handsomely for it. Link to comment Share on other sites More sharing options...
el_freddo Posted November 29, 2018 Share Posted November 29, 2018 I can’t fathom how you guys over there manage to break so many of these oil pumps. I’ve done three or four oil pump removals each from a different engine without issue. All the best with finding one over there! Cheers Bennie 1 Link to comment Share on other sites More sharing options...
86BRATMAN Posted November 29, 2018 Share Posted November 29, 2018 I replied to your pm. It wouldn't let me attach pictures there for whatever reason so I'll load them here. Link to comment Share on other sites More sharing options...
yournmhr Posted November 29, 2018 Author Share Posted November 29, 2018 You are a life saver!! I just replied to your PM with my contact info. Thanks! Link to comment Share on other sites More sharing options...
carfreak85 Posted November 29, 2018 Share Posted November 29, 2018 (edited) If anyone else needs an EA81 oil pump, I've got a spare one. Edited December 7, 2018 by carfreak85 Link to comment Share on other sites More sharing options...
Lugnut Posted September 13, 2019 Share Posted September 13, 2019 On 11/29/2018 at 3:12 PM, carfreak85 said: If anyone else needs an EA81 oil pump, I've got a spare one. Do you still have this pump available? Mine has a split in the housing and is leaking oil bad. Link to comment Share on other sites More sharing options...
Steptoe Posted September 13, 2019 Share Posted September 13, 2019 Might have to export a few of mine in used condition if I can find them Link to comment Share on other sites More sharing options...
Leonas Posted September 3, 2020 Share Posted September 3, 2020 On 9/13/2019 at 12:23 PM, Steptoe said: Might have to export a few of mine in used condition if I can find them Hi, I'm searching for EA81 oil pump. Link to comment Share on other sites More sharing options...
Leonas Posted September 4, 2020 Share Posted September 4, 2020 Photo before could be good. Link to comment Share on other sites More sharing options...
Step-a-toe Posted September 4, 2020 Share Posted September 4, 2020 (edited) The one I have out in the dark shed has score marks in more places than I like, such as the recess in the main housing where steel rotor spindle sits. I have pulled it apart and cleaned it. GD reckons it should be tossed, but might save some old buckets for another life time Edited September 4, 2020 by Step-a-toe Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 4, 2020 Share Posted September 4, 2020 Part Number: EJ22E GD 4 Link to comment Share on other sites More sharing options...
Step-a-toe Posted September 6, 2020 Share Posted September 6, 2020 On 9/5/2020 at 6:41 AM, GeneralDisorder said: Part Number: EJ22E GD And all the other part numbers required to finish a project some just cannot do themselves or cheaply ?? Radiator work Exhaust work Electrical hook up Dodgy looking flywheel mods Adaptor plate..... Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 6, 2020 Share Posted September 6, 2020 It's really not that difficult. Try it. The radiator is just a matter of some hoses. The exhaust is just some welding. Any exhaust shop can handle this. Electrical.... that's usually the component that separates the men from the boys. The flywheel re-drill is simple and not at all "dodgy" as you suggest. Have done plenty of them. Very simple with a mill. Adapter plate is available from a variety of sources. And the reward for all this is nearly double the HP. Worth it. GD 1 Link to comment Share on other sites More sharing options...
Step-a-toe Posted September 6, 2020 Share Posted September 6, 2020 I am trying....had no choice but rush to extract bits before body disposal , so not the best intro to EJ sampling, so got a dirty EJ22 gift-wrapped and spaghetti with not a good diagram support Also got an EJ20 and it's AWD 5MT sitting in Brumby, working on gearbox cradle, one piece or two tailshaft lip chewing A space,time, money thing Link to comment Share on other sites More sharing options...
el_freddo Posted September 6, 2020 Share Posted September 6, 2020 (edited) @Step-a-toe - Send us your engine management loom, I’ll cut it down for you mate It’s not that hard, you just need to know how to read a wiring diagram and know what to cut and what to keep... the first one is always the hardest. Cheers Bennie Edited September 6, 2020 by el_freddo Link to comment Share on other sites More sharing options...
Step-a-toe Posted September 7, 2020 Share Posted September 7, 2020 17 hours ago, el_freddo said: @Step-a-toe - Send us your engine management loom, I’ll cut it down for you mate It’s not that hard, you just need to know how to read a wiring diagram and know what to cut and what to keep... the first one is always the hardest. Cheers Bennie Wow, thanks Bennie. I really need to be able to do it for myself with time and patience and probably all over the kitchen table Part of my downfall is doing things spread out on the ground, in the sun, crowching not good for the body. The loom and ecu were pretty crudely removed. My GF8 ecu and loom removal was better but still rough. i need to sit down with one of the ecu and draw things up to file away carefully. Really think uncle's ute is going back to EA82M#2 in the shorter term Link to comment Share on other sites More sharing options...
moosens Posted September 7, 2020 Share Posted September 7, 2020 Saw horses and plywood. Getting old here , can tell ya you’ve got to start thinking like you are now. Aches n pains have to be minimized. 1 Link to comment Share on other sites More sharing options...
Step-a-toe Posted September 7, 2020 Share Posted September 7, 2020 14 hours ago, moosens said: Saw horses and plywood. Getting old here , can tell ya you’ve got to start thinking like you are now. Aches n pains have to be minimized. I had a light bulb moment when I saw what I think was OEM loom supplier photos of it all on a wall of peg board or fine mesh with labels and ties Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now