scdrtramp Posted January 3, 2019 Share Posted January 3, 2019 I bought a 95 impreza and the radio was trashed, so I'm trying to install an aftermarket one. I have no power on either the switched(red and yellow) wire, or the unswitched(yellow) wire. I only have a chiltons manual and it has a vague diagram and it don't show the radio wiring. Has anyone else had this pronlem, and if so what was the fix. Thanks Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted January 3, 2019 Share Posted January 3, 2019 maybe crutchfield.com offers an adapter cable? Link to comment Share on other sites More sharing options...
Subasaurus Posted January 3, 2019 Share Posted January 3, 2019 (edited) have you metered the fuse that corresponds to the radio yet? fuse box is located on the drivers side on the left, very uncomfortable to get to, but it has to be done. Edited January 3, 2019 by Subasaurus Link to comment Share on other sites More sharing options...
wtdash Posted January 3, 2019 Share Posted January 3, 2019 ^+1 Check fuses - if it was 'trashed' likely blew 1 or 10. Link to comment Share on other sites More sharing options...
scdrtramp Posted January 3, 2019 Author Share Posted January 3, 2019 Thank you all for your responses. The adapter won't do it because there is no power in the factory plug. I found one blown fuse in the box under the hood, but not sure what it was for. I don't know which fuse is for the radio, because I don't have the owners manual. Thanks again. might have to run my own wires Link to comment Share on other sites More sharing options...
wtdash Posted January 3, 2019 Share Posted January 3, 2019 The lid for the fuses under the hood ID's the fuses. As does the cover for the fuses under the dash (for Legacy @ least.) Also,Google found this: https://www.autogenius.info/subaru-impreza-1992-1998-fuse-box-diagram/ Link to comment Share on other sites More sharing options...
heartless Posted January 4, 2019 Share Posted January 4, 2019 sounds like you could use this site: http://jdmfsm.info/Auto/Japan/Subaru/ you should be able to find wiring diagrams and whatever else you may need. 1 Link to comment Share on other sites More sharing options...
FerGloyale Posted January 5, 2019 Share Posted January 5, 2019 Think those colors are wrong. yellow and yellow red wires are for speakers. You need a green single pole (batt power) and IIRC Blue/red wire will be the switched 12v Link to comment Share on other sites More sharing options...
Mike104 Posted January 7, 2019 Share Posted January 7, 2019 Go here and check the wiring colors http://ae64.com/WRX-pinout.htm 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now