scor440 Posted February 18, 2019 Share Posted February 18, 2019 Is there a formula to use for a 3” lift when i extend the strut bottom to drill the bottom hole to maintain the stock camber the picture is for a buick the bottom hole is new the top two are stock and are inline with each other it looks like the bottom one is drilled at a offset any help would be great. Link to comment Share on other sites More sharing options...
FerGloyale Posted February 18, 2019 Share Posted February 18, 2019 You're going to need wheel spacers if you do that route. The tire/rim will hit that strut if you don't space it down. Talk to Anderson design lifts......his rears are like that. Most people use strut top lifts. Link to comment Share on other sites More sharing options...
scor440 Posted February 18, 2019 Author Share Posted February 18, 2019 43 minutes ago, FerGloyale said: You're going to need wheel spacers if you do that route. The tire/rim will hit that strut if you don't space it down. Talk to Anderson design lifts......his rears are like that. Most people use strut top lifts. I dont see wheel spacers in the kit they offer so i emailed them Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now