Brianmitchtay Posted March 26, 2019 Share Posted March 26, 2019 Hi guys, I recently redid the heads on my 1987 EA82 GL wagon, and after I had it all apart I realized that I didn't have new o rings for the camshaft case (or the cam tower itself for that matter) I just used a little bit of the threebond form in place gasket to seal the small hole that sends oil to the lifters, but they tick a bit more now than they did before so I'm wondering if anyone knows where to get a proper o ring to seal it up. The dealer said they can special order them for me but it's $5 a piece and I feel like they're probably out there for cheaper somewhere. Rock auto has the cam tower o rings and seals for $1.88 a set (I've learned my lesson on the actual seals and would only use the o-rings), but none of the little o rings that go between the cam case and the head. Link to comment Share on other sites More sharing options...
88SubGL Posted March 26, 2019 Share Posted March 26, 2019 Use only Subaru factory o-rings. Go to parts.subaru.com to order them and then pick them up at your local dealership. They’re $2.75 each. 1 Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 27, 2019 Share Posted March 27, 2019 Get the dealer ones while you still can. Even at $5 that is a bargain for quality parts. GD 2 Link to comment Share on other sites More sharing options...
impostor Posted March 27, 2019 Share Posted March 27, 2019 13089AA010 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now