bull6791 Posted May 18, 2019 Share Posted May 18, 2019 I wanted to know if someone can show me the location of the PCV valve. I have a 2011 Forester and can not find it. A picture or video would be great. Thanks Quote Link to comment Share on other sites More sharing options...
Sapper 157 Posted May 18, 2019 Share Posted May 18, 2019 https://www.subarupartsforyou.com/oem-parts/subaru-pcv-valve-11810aa131?origin=pla&gclid=Cj0KCQjw2v7mBRC1ARIsAAiw34_iHKBti9tURJTUOJAhKQvrPOIA7cMeznqObnJZ9oW-8G_0sKhxGQEaAompEALw_wcB Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 18, 2019 Share Posted May 18, 2019 If you have oil consumption, make sure you try an OEM Subaru PCV valve ONLY! Aftermarket are garbage. And if that doesn't fix the oil consumption then you need new rings. GD 1 Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 18, 2019 Author Share Posted May 18, 2019 General dissorder Where is the valve located under the hood so I can change it out. I can’t find it. Thanks. Quote Link to comment Share on other sites More sharing options...
89Ru Posted May 18, 2019 Share Posted May 18, 2019 Picture is at the right side of engine, looking sideways. Follow the hose at the red arrow. Will go down to engine block, there is the PCV. This is a 2007, so will be a bit different on yours. Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 18, 2019 Author Share Posted May 18, 2019 Why is it so hard to find the PCV valve for a 2011 Forester. I keep looking under the hood and I can’t find it. If you know where it is please let me know. Thanks. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 19, 2019 Share Posted May 19, 2019 https://youtu.be/gr3zL4J-NwM GD Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 19, 2019 Author Share Posted May 19, 2019 General disorder How hard is the PCV valve in the video to get to and replace. Thanks. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 19, 2019 Share Posted May 19, 2019 It takes about 2 minutes. GD Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 19, 2019 Author Share Posted May 19, 2019 General disorder. Thanks. From the video it looks like it’s in a spot that is hard to reach. If it’s not to much trouble. What socket is needed thanks. I really appreciate it. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 19, 2019 Share Posted May 19, 2019 19mm deep 3/8" socket typically. Long extension. It's very simple. GD Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 19, 2019 Author Share Posted May 19, 2019 I appreciate very much. Thanks. This is my first ever experience with a Subaru vehicle. I mainly work on Toyota’s. Thanks. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 19, 2019 Share Posted May 19, 2019 Subaru's are much easier to work on than most any Toyota. But that particular model needs new piston rings to stop it's oil consumption. There is a 100k mile extended warranty on the short block because of faulty piston rings. GD Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 19, 2019 Author Share Posted May 19, 2019 General disorder My 2011 Subaru Forester has 57,000 miles on it. It came with a 3 year/36,000 mile warranty which is up. Where is the 100k extended warranty you are talking about. Also are you saying that the 2011 Subaru Forester with oil consumption when it was brand new before any one drove it. It had faulty rings. They made all these vehicles brand new with faulty rings. That is why it consumes oil. What is wrong with the rings. Thanks. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 19, 2019 Share Posted May 19, 2019 The rings were manufactured (by Subaru's ring supplier) incorrectly. They cause oil consumption. There is an extended warranty on the engine block that applies to all 11 Foresters if they exhibit excessive oil consumption. You have to go to the dealer for an oil consumption test. GD Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 19, 2019 Author Share Posted May 19, 2019 My mother used to have a 07 Camry with oil consumption. It was also the rings. Like you said you for her Camry you had to have an oil test done by dealer. If you fail the test you can get new rings for free. I do not know about Subaru but Toyota you had up to a certain mileage or date to get it done. Quote Link to comment Share on other sites More sharing options...
Mike104 Posted May 20, 2019 Share Posted May 20, 2019 Here are the details from Subaru https://subaru.oemdtc.com/80/engine-oil-consumption-2013-2015-subaru 100k miles/8 years 1 Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 25, 2019 Author Share Posted May 25, 2019 Gd Going by video the PCV valve is connected by a rubber hose. On my 2011 Forester I do not know if it is the right hose but on my car the same hose as in the video has a sliver spring on it. If it is the right hose on my 2011 Forester connected to PCV valve. Then what is the silver spring for. Thanks. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 26, 2019 Share Posted May 26, 2019 You mean the spring hose clamp? If that's not what you mean then I'll need a picture. If it is then it's purpose is self explanatory isn't it? GD Quote Link to comment Share on other sites More sharing options...
bull6791 Posted May 26, 2019 Author Share Posted May 26, 2019 Gd How do you put a picture in this post. Can you put the picture in this post from phone camera roll. Thanks. Quote Link to comment Share on other sites More sharing options...
el_freddo Posted May 29, 2019 Share Posted May 29, 2019 On 5/27/2019 at 4:35 AM, bull6791 said: Gd How do you put a picture in this post. Can you put the picture in this post from phone camera roll. Thanks. Host them image on a free photo hosting website or reduce the photo size and attach it to your post. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
Stevo F Posted June 1, 2019 Share Posted June 1, 2019 I just changed the PCV valve on my 2003 and it was in the same spot as the 2009 in the You Tube video (I believe that was the first year it was located there). Super easy to replace, but plan on replacing the PCV hose as well as it will get brittle over time. Mine snapped off when replacing the PCV valve. 1 Quote Link to comment Share on other sites More sharing options...
bull6791 Posted June 30, 2019 Author Share Posted June 30, 2019 What socket is needed to replace 2011 Forester pcv valve. 19mm, 22mm or 3/4. Thanks. Quote Link to comment Share on other sites More sharing options...
bull6791 Posted July 1, 2019 Author Share Posted July 1, 2019 General disorder question: when I go to the dealer to get a pvc valve for my 2011 Subaru Forester what do I have to tell the parts guy. Thanks. Quote Link to comment Share on other sites More sharing options...
el_freddo Posted July 1, 2019 Share Posted July 1, 2019 You need to ask for a pcv valve for a 2011 Subaru Forester! If the parts interpreter can’t work it out then they shouldn’t be in that job!! Don’t forget to say hello and the usual polite mannerisms etc Cheers Bennie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.