carfreak85 Posted July 17, 2019 Share Posted July 17, 2019 (edited) I've been slowly combing through various subsystems on my RX and the most recent system to get some love was the PCV system. I found that every hose is still available, except the one that attaches directly to the PCV valve on the intake manifold. I ran down to my local auto parts store with the original hose in hand to pick through their selection of hoses. WELL! It turns out that the small heater hose from a 2002-2009 Ford Explorer (Dayco P/N 87730) is almost a perfect fit. Hose was about $7 and needed to have a small portion trimmed off. NOTE: EPDM is NOT oil safe, so until I find a better solution, I'll need to keep an eye on this hose to make sure it isn't perishing too quickly. Edited July 24, 2019 by carfreak85 7 Link to comment Share on other sites More sharing options...
Orri Posted July 24, 2019 Share Posted July 24, 2019 did you buy the other ones at the dealer? Link to comment Share on other sites More sharing options...
carfreak85 Posted July 24, 2019 Author Share Posted July 24, 2019 Yes, from the dealership. They are still available, for now... Link to comment Share on other sites More sharing options...
Stoner Dude Posted August 5, 2019 Share Posted August 5, 2019 awesome. i hope i remember this when I'm ready to replace mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now